SHENZHEN DYS FIBER OPTIC TECHNOLOGY CO.,LTD |
|
LC Fast Optical Fiber Connector 3.0 x 2.0 mm Bow-type Drop Cable
Specifications
It enable easy and fast fiber termination in the field. It is possible to reconnect, so can be reduced the rate
Description
1. Twin end-face of pre embedded fiber is polised in the factory..
2. Fiber optics is aligned in V-groove through the ceramic ferrule.
3. Side cover design provide complete preservation of the matching liquid.
4. Ceramic ferrule with pre-embedded fiber is polished to APC.
5. Length of the FTTH cable is controllable
6. Simple tooling, easy operation, portable style and reusable design.
7.Connector size: 49.5*7*6mm or produced as per client's request.
Technical specification
Item | Parameter |
Cable Scope | 3.0 x 2.0 mm Bow-type Drop Cable |
Fiber Diameter | 125μm ( 652 & 657 ) |
Coating Diameter | 250μm |
Mode | SM |
Operation Time | about 15s(exclude fiber presetting) |
Insertion Loss | ≤ 0.25dB(1310nm & 1550nm) |
Return Loss | ≤ -45dB |
Success Rate | >98% |
Reusable Times | >10 times |
Tensile Strength | >5 N |
Tighten Strength of Coating | >10 N |
Temperature | -40~+85°C |
On-line Tensile Strength Test (20 N) | IL ≤ 0.3dB |
Mechanical Durability(500 times) | IL ≤ 0.3dB |
Drop Test(4m concrete floor, once each direction, three times total) | IL ≤ 0.3dB |
Relevant Solutions
Easy operating, The connector can be directly used in ONU, also with fasten strength more than 5 kg, it is widely used in FTTH project of network revolution. It also reduce the use of sockets and adapters, save cost of project.
With 86 standard socket and adapter, the connector makes connection between drop cable and patch cord. The 86 standard socket provides complete protection with its unique design.
Installation instructions