|
[China]
Trade Verify
Contact name:Alice
NEW LIGHT OPTICS TECHNOLOGY LIMITED |
|
Verified Suppliers
|
|
|
Low insertion loss 3.0mm 100G MPO to MPO Jumper Patch cord with Female Connector 10m
Overview of
Low insertion loss 100G MPO to MPO Jumper Patch cord with Female Connector 10m
Data centers nowadays are undergoing great migration to higher
speed networks. Considering the inevitable cabling growth in
40/100G high-density environment, 12-fiber and 24-fiber MTP/MPO
cabling is introduced as an ideal and feasible solution. This
article provides a basic understanding of MTP/MPO cabling system,
which may help to deliver solid MTP/MPO interconnection with proper
polarity management.
In any installation, it is important to ensure that the optical
transmitter at one end is connected to the optical receiver at the
other. This matching of the transmit signal (Tx) to the receive
equipment (Rx) at both ends of the fiber optic link is referred to
as polarity. The polarity of MTP/MPO cabling in 40G/100G has
haunted many cable managers. Fortunately, there are approaches that
can facilitate correct MTP/MPO polarity maintenance in serial
duplex signals connections and parallel signals connections.
Polarity Matters in MTP/MPO Cabling Link
Migration from 10G to 40/100G requires a simple yet robust pathway.
And this pathway is centered around MTP/MPO connectivity. To
maintain the correct polarity in MTP/MPO systems, the property of
the components of MTP/MPO systems should be understood firstly. So,
this section begins with a presentation of the basic components
needed for MTP/MPO cabling system.
MTP/MPO Connector
MTP/MPO connector can house anywhere from 6 to 72 fibers, with
12-fiber arrays being the most common. MTP/MPO connector is
available in a male version (with pins) or a female version
(without pins). The pins ensure that the fronts of the connectors
are exactly aligned on contact and that the endfaces of the fibers
are not offset. There are guide grooves (keys) on the top side of
the MTP/MPO connector, which ensures that the adapter holds the
connector with the correct ends aligned with each other. A white
dot is additionally marked on one side of the connector to denote
where the position 1 is. The orientation of this key also
determines the MTP/MPO cable's polarity.
Products info
| Fiber count | 12 | Fiber Mode | 9/125μm |
| Connector Type1 | LC | Connector Type2 | Unterminated |
| Fiber Mode | SM | Breakout length | 1.5m |
| Wavelength | 1310/1550nm | Jacket Material | PVC/LSZH |
| Insertion loss | ≤0.25dB | Interchangeability | ≤0.2dB |
| Return loss | ≥50dB | Vibration | ≤0.2dB |
| Operating temperature | -40~75°C | Storage temperature | -45~85°C |
Geometric Specification (only for 3D interferometer tested)
| Type | Vertex offset(um) | Curvature radius(mm) | Feber Height(nm) | Angle offset(°) |
| 2.5mm UPC | ≤50 | 10~25 | (-50, +50) | None |
| 2.5mm APC | ≤50 | 5~12 | (-50, +50) | 8±0.2 |
| 1.25mm UPC | ≤50 | 7~25 | (-50, +50) | None |
| 1.25mm APC | ≤50 | 5~12 | (-50, +50) | 8±0.2 |
Pakcing
We will pack it by OPP bag and carton box outside . in order to protect the goods are not damaged when delivery .
FQA
1. Q : Are you manufacturer ?
A: yes, we are manufacturer in Shenzhen,China
2. Q : What's your MOQ ?
A: MOQ can be 1 pcs , but we are not suggest to order 1 pcs , because the cost will be higher , so that the price will be higher than your budget .
3. Q : What's the price ?
A : The price is according to your quantity . After you let us know your quantity , we will offer our best price for you . Big Quantity will get very competitive price .
4. Q: Can you quote FOB price ?
A : yes we can , But due to the size and weight is not big , most are delivery by air ,DHL , TNT , UPC , FEDEX ,etc . So it it difficult to do FOB price . The best way is let us know your detailed specifications and quantity , we will offer the freight with products price for your reference .
We have very competitive price logist . If your quantity is big and there are dozens of carton boxes , we can figure out freight by sea for your reference .
EXW price or CFR price will be better . You can contact us for more solution if you need .
5. Q: How is your quality ?
A: Our production is according to IEC , Europe standard production , almost closed to dust-free workshop . Imported production equipment and quality control equipment . Especially MTP Daisi equipments .
All the products are 100% test before delivery .
6. Q : Whats your lead time ?
A : We have three factories in China . One factory for fiber optic cable production , two factories for patch cord , PLC , ODF , adaptor ,attenuators ,etc .
For fiber optic patch cord , the lead time can be 2 -3 owrking days for 5000 pcs . regular products we are have it in stock . We can deal with urgent order for you . More informations , you can feel free to contact us .
7. Q : Whats your warranty ?
A : for patch cord , we have 2 years warranty since delivery , but only responsible for non-artificial damage . For artificial damage , we can repare it for you for free ,but freight will be paid by your side .
8. Q : Whats your packing ?
A : We are using international export package . attached some packing of different products for your reference . We also can print your logo on the packing
9. Q: Can you do OEM/ODM ?
A: yes , we can . We are manufacturer , all products are accept OEM /ODM . we can sign the Confidentiality agreement .
10. Q: Can I have a sample ?
A: It depends on which products , for adaptor , attenuator ,patch cord , pigtail , we can provide a sammple for you for free . But freight repaid by your side .
For big value products , we can't offer it for free , sample charge and freight repaid first , after you placed order , the sample charge will be returned.
11. Q: How can I order ?
A: 1. send mail to us or send inquiry . let us know the products name , detailed specifications , quantity . Provide your receive address if you need us to figure out freight for you .
2. After we know your requirements , will offer our best price for you ,with lead time . The price is according to your quantity .
3. When you accept the quotation , we will make Profoma Invoice with our bank account .
4. We will arrange the production for you after we received payment .
5. Before we delivery will confirm the receive information with you again .and will send the tracking number to you after delivery .
6. We will try our best to meet your requirements for long-term cooperation .
12. Q: What your payment term ?
A: T/T , Western Union , Paypal ,MoneyGram at once .For big amount , can 50% deposit in advance , 50% balance paid before delivery .
