Active Member
|
[China]
Address: Rm1708,Keeven Modern Building No.43,Western Road of BeiSanHuan Hai dian district,Beijing,China 100086
Contact name:Ellen Wang
Beijing Spacecom Co., Ltd. |
|
|
1U 1550nm PM Optical Amplifier EDFA
The product is a high stability output power EDFA. The stability
Pump Laser and unique ATC (automatic temperature control) and AGC
(automatic gain control) circuit are employed in it as the key
components to ensure the high stability and reliability of output
power. The unique optical circuit design ensures the excellent
optical characteristics. The high stability and high precision MPU
system are employed to ensure the control adjustment and display
are intelligent and user-friendly.
Professional design GFF (gain flattening filter) with excellent
optical path design make flatness and noise reach the best
optimization. It can provide 40~80 channels, and flatness above
35nm.
The optical circuit is designed especially for digital optical
fiber communication system including:
(1) lower noise figure
(2) the high output booster and high sensitivity pre-amplifier
improve the system loss budget
(3) Broad input power range and output power is adjustable easily.
The design of dual Power Mixed and hot swap provides longer MTBF.
Also, the power system can be backed up.
Employing the intelligent temperature control system,the fan is on
when the module temperature over 35℃, and it will stop when the
temperature goes under 30℃, which ensures the thermal stability and
fan’s long life-time, moreover, the professional air flow design
can also ensure the best temperature stability.
Intelligent network management system. Perfectly network interface:
Ethernet, RS-485 and RS-232 network interface,and the open mib
ensure the connectivity with all other network management systems.
Features
This Single Channel EDFA has the following features:
| Parameters | Min. | Max. | Unit |
| Working Temperature | -5 | +60 | ℃ |
| Storage Temperature | -40 | +80 | ℃ |
| Humidity | 5 | 85 | % |
Note: non-condensing
| Parameters | Min. | Typ. | Max. | Unit |
| Size | 1U H×D×W≤44x236x483 | mm | ||
| Weight | ----- | ----- | 6 | Kg |
| Power Consumption1 | ----- | ----- | 18 | W |
| Cooling | Air cool fans | |||
| Power Supply2 | 85/170 | 110/220 | 132/264 | VAC |
| Interface | RS-232, Ethernet | |||
(1)Actual consumption depends on the output power and environment
temperature.
(2)110VAC, 220VAC and -48VDC are optional.
| Parameter | Min | Typ | Max | Units | Remark |
| Wavelength Range | 1529 | 1550 | 1561 | nm | |
| Output Power | ------ | 20 | dBm | Optional | |
| Gain | 35 | dB | Optional | ||
| Flatness | ------ | 1.0 | 1.5 | dBm | @typical gain |
| Input Power1 | -25 | -5 | dBm | Optional | |
| Output Power Stability | ------ | ±0.1 | dB | ||
| NF (In=0dBm, λ=1550nm) | ------ | 5.0 | 5.5 | dB | @max output,typical gain |
| PMD (Polarization Mode Dispersion) | ------ | ------ | 0.5 | ps | |
| PDG (Polarization Dependent Gain) | ------ | ------ | 0.3 | dB | |
| RL (Optical Return Loss) | 45 | ------ | ------ | dB | |
| Pump Leakage at Input & output | -30 | dBm |
*1 When input power is lower than -26dBm, it will alarm. And when input power is lower than -28dBm, pump laser will be off.
| Parameter | Min | Typ | Max | Units | Remark |
| Wavelength Range | 1529 | 1550 | 1561 | nm | |
| Output Power | ------ | ------ | 20 | dBm | |
| Gain | ------ | ------ | 30 | dB | |
| Flatness | ------ | 1.0 | 1.5 | dBm | @typical gain |
| Input Power1 | -15 | 5 | dBm | ||
| Output Power Stability | ------ | ±0.1 | dB | ||
| NF (In=0dBm, λ=1550nm) | ------ | 5.0 | 5.5 | dB | @max output,typical gain |
| PMD (Polarization Mode Dispersion) | ------ | ------ | 0.5 | ps | |
| PDG (Polarization Dependent Gain) | ------ | ------ | 0.3 | dB | |
| RL (Optical Return Loss) | 45 | ------ | ------ | dB | |
| Pump Leakage at Input & output | -30 | dBm |
*1 When input power is lower than -26dBm, it will alarm. And when input power is lower than -28dBm, pump laser will be off.
Quality control
More Question
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship about 3 days after received payment.For big quantity and special products,Please check lead time with
our sales representative.
3. How do you ship the goods and how long does it take arrive?
We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5
days to arrive.
4. What is your payment terms?
Usually,we need prepayment by T/T,West Union or Paypal.
Could also support L/C,Credit terms.
5. What is your warranty time
We promise 3 years warranty for all products shipped from us.
6. Could I return the products if there is a quality problem?
Yes,if there is a quality problem happen,we could accept free
exchange.
7. Could i use our own logo and label?
Yes,we could provide a OEM service and make the products with your own label.
