Active Member
|
[China]
Address: M20-15-1, Hangzhou economic and technological development Area, Hangzhou, China.
Contact name:Serena Liu
HANGZHOU SPECIAL AUTOMOBILE CO.,LTD |
|
|
Dry Bulk Truck 22cbm Dongfeng 4x2 Hydraulic Lifting System
Quick Details:
1. Name: Dry Bulk Carrier
2. Hydraulic System: Lifting type with self-loading and unloading
system
3. Chassis: Dongfeng
4. Drive Type: 4x2
5. Tank Capacity: 22cbm
Fully hydraulic lifting and loading system, can be completed whole
operation by few labour.
The set of hydraulic lifting system was a developed product,
pantented technical cooperate with Germany “GERGEN”.
Main arms in gooseneck design(patented) ensure pick-up and deposit
out of angle position up to 45°. Pneumatic proportional control for
main cylinder. Loading platform in front with integrated hose
guiding and protection. Hydraulic van locking for safe and rapid
operation. Rear loading platform, short overhang. can greatly
achieve and complete the loading/unloading selfly, educe cost,
avoid time-wasting, and save more labour.
Basic Specs:
1. Tank Diameter: 1800-2500mm
2. Discharge redisdual ratio: ≤1.5m³
3. Turnovers: 0~95(°)
4. Tank Loading Mass: ≤4200kg
5. Lift Height: 5500~6000mm
Specifications:
The whole | Dimension | Outer dimension | 9700×2490×2760 | Gearbox | Mode | DF6S750 | ||||||
Type | manipulation | |||||||||||
Wheelbase(mm) | 5600 | Manufacturer | Dong Feng Automobile Co.Ltd. | |||||||||
Operation | Soft axle manipulation | |||||||||||
Front/Rear overhang | 1460/2670 | Forward stalls | six | |||||||||
Approach/Departure | 20/9 | Speed Ratio | 6.44/3.841/2.29/1.477/1 | |||||||||
Quality | Tare weight(kg) | 8805 | Engine | Type and model | Electronic pressurized water-cooled cylinder diesel engine | |||||||
Payload(kg) | 3000 | |||||||||||
Total mass(kg) | 12000 | Model | ISDe185 30 | |||||||||
Special | Mortar tank | ≤3000Kg | Manufacturer | Dongfeng Cummins | ||||||||
Residual rate(m3) | ≤1.5 | | 4.5 | |||||||||
Turn round angle(°) | 0-92 | Fuel type | Diesel | |||||||||
chassis | Model | DFL5120XXYB1 | Emission standard | National III | ||||||||
Type | Second | |||||||||||
Manufacturer | Dong Feng | Max.speed(km/h) | 90 | |||||||||
No of axle | 2 | |||||||||||
STORAGE TANK FOR DRY-MIXED MORTAR | ||||||||||||
Type of tank | CG storage-35t | |||||||||||
Nominal storage volume(m3) | 22 m3 | |||||||||||
Discharge valve diameter(mm) | 250 | |||||||||||
Height of discharging(mm) | 750 | torage weight(Kg)S | 35000 | |||||||||
Tare weight(Kg) | 2900 | Diameter(mm) | 2400 | |||||||||
Distance of foot spacing(lateral) | 2.1m×2.1m | |||||||||||
Drive motor power(KW) | 5.5 | |||||||||||
Water pump power(W) | 750 | Vibration pump power(W) | 370 | |||||||||
