Luxury Type Vacuum Transformer Oil Filtration Machine With Europe Brand Pumps

Luxury Type Vacuum Transformer Oil Filtration Machine With Europe Brand Pumps

Application:

SVP series vacuum transformer oil purification unit can remove water content, gases, and solid contaminants from insulating fluids, recovering oil dielectric strength (breakdown voltage BDV).

This oil purification machine helps to dry out moisture of waste insulating oil. Particulate impurities are separated gradually, from coarse particles to tiny ones, as they pass the filter assembly. The filter fineness can be customized according to clients’ request.

SVP transformer oil purification machine has compact design. The vacuum oil degasifier can be encased and mounted on a mobile trailer for on-site field work at power station, electrical substations , and where transformer maintenance is needed. Besides oil-immersed transformers, our SVP transformer oil purification machine can also be applied to maintain oils used in other attendant electrical equipment, such as regulators,mutual inductors, reactors, circuit breakers, switch gear, etc.

Description of SVP50 luxury type machine:

This is the luxury type of our SVP50 model transformer oil purifier machine with Siemens PLC automatic control system,it can treat 50L/minute(3000L/hour) transformer oil,this machine produced with Europe famous brand Germany Leybold vacuum pump and root pump,Schneider electric parts,Siemens S7 PLC ,On-line Moisture detector,Flow meter etc,we also could supply the China famous brand pumps and other parts as customer required.

Structure of SVP transformer oil purifier:

1. Filtering system: Filter is cylinder shape and disposed vertically, for maintenance purposes. Filtering

equipment equipped with two or more filters. There is a pressure gauge on the filter to monitor pressure

differential passed the filter. under normal operating temperature if pressure difference on the filter is

more than 0.3Mpa, you must clean the filter.

2. Heating system: Automatic temperature system control oil temperature in the range of 20 ~ 80 °C

adjustable.These heaters are interlocked with pumps and vacuum pumps, heaters can only work when the

oil pump and pump operation, both to ensure the safe operation of the heater, but also to prevent the

generation and oil aging "dead" oil zone, but also real -time monitoring the temperature of the heating

system and controls the heater set temperaturewithin a range of work; to avoid damage caused by dry heater. Multiple sets of heater can be used alone, can also beput into use; Under normal weather conditions, full load flow pump can be heated to the operating temperature, but in very cold weather conditions that may need to be part of the oil flow

recycled in order to achieve the correct temperature.

3. Vacuum system: vacuum system consists of a vacuum separator, vacuum pumps, condensers, coolers

and other components.

4. Automatic control system includes the liquid level controller, motor, and other components of the original protection.

5. Cooling system is made of the radiator, cooler, reservoir and other components. Separated vapor and

other gases out of the vacuum evaporation , after passing through the radiator into the cooler,

reduced to reservoirwater is collected, and dry gas is a discharged from the vacuum pump, thereby protect

vacuum pump.

Technical specification:

Index Of Purified Oil: