Home Companies JUNENG MACHINERY (CHINA) CO., LTD.

450mm Horizontal Decanter Centrifuge For Collection Transportation Of Kitchen Waste

JUNENG MACHINERY (CHINA) CO., LTD.

Contact Us

[China] country

Trade Verify

Address: Chaoyang Road, Zhotie Town,Yixing City Jiangsu Province.China

Contact name:Doris.zhou

Inquir Now

JUNENG MACHINERY (CHINA) CO., LTD.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

450mm Horizontal Decanter Centrifuge For Collection Transportation Of Kitchen Waste

Country/Region china
City & Province chaoyang jiangsu
InquireNow

Product Details

Horizontal centrifuge for collection, transportation and disposal of kitchen waste

Introduction   

The slurry after cleaning kitchen waste is divided into three components under the force of a high-speed rotating centrifuge: crude oil, wastewater, and waste residue. This equipment can operate continuously under a maximum feed rate of 8 tons/hour, and has stable, efficient, economical, reliable, and strong anti-interference ability.

The centrifuge is composed of a casing, a drum, a rotor (with spiral blades), bearings, bearing seats, differentials, main motors, auxiliary motors, lubrication stations, brackets, etc. The entire unit is placed on the same common base, and the support leg shock absorption device is placed on the equipment foundation.

Working principle

The centrifuge consists of two rotors,one is called "drum", and the other is "screw unloader "(referred to as a screw). When the drum rotate at high-speed, with the slurry along the drum, by centrifugal force, and this centrifugal force is many times greater than gravity, so that the solid particles will be separated from the liquid in the centrifuge drum axis, sedimentation to the inner wall of the drum. A screw unloader located in the drum rotates below the speed of the drum and pushes the deposited solid particles to the slag outlet. The differential speed between the outer drum and the screw unloader (affects the slag pushing Speed)depends on the gear ratio of the differential and its speed. The two-phase liquid is divided into two layers by centrifugal force. The heavy phase layer is drawn out by the centripetal pump against the wall of the drum and discharged from the heavy phase outlet.The light phase layer is close to the screw end, thrown out by centrifugal force from the overflow port, and then discharged from the light phase outlet. The whole work is continuously completed between the closed upper and lower shells.

Product process

Separator process workshop

 

Drum processing

 

Process center

 

Ultrasonic testing

Dynamic balancing test

 

Assembling

Product structure 

The centrifuge is a countercurrent horizontal spiral discharge sedimentation centrifuge for sludge dewatering. The main engine is composed of drum (stainless steel 2205), screw (stainless steel 2205+316L) and differential system. The differential speed is automatically fed back and adjusted according to the load change, and the pushing power is automatically compensated to ensure the constant dryness of the solid slag and get a drier solid slag.

 

It is poured by an integral centrifuge, and then processed by precision turning after solution treatment. The solid phase slag discharge port is equipped with replaceable tungsten carbide wear-resistant bushing. The inner wall of the centrifuge drum is welded with anti-skid wear-resistant strips to prevent the solid particles from tangential rotation and wear on the inner wall of the drum.

 

Advantages.

1. Lower cake transportation costs due to very dry solids

2. Better recovery of nutrients due to very high separation efficiency

3. Lower fresh water consumption compared to other processes

4. Continuous and fully automatic operation

5. 24 h operating reliability

6. Optimum wear protection

7. Energy saving design

8. Easy to operate

9. Easy to maintain

10. Simple assembly/dismantling
 

Application

1. Washing and dehydration of starch

2.Dehydration of soybean wheat proteins

3.Dehydration of fish meal and fish

4.Dehydration of brewers' grains

5.Purification of juice and dehydration of fruit fiber

6.Separation and purification of animal and vegetable oil

7.Separation and purification of coal tar

8.Clarification and purification of gypsum

9.Classification and dehydration of starch

10.Classification and dehydration of Kaolin and graphic

11.Classification and dehydration of dyes and pigments

12.Classification and dehydration of mineral thick liquid

  

 

Our company

 
 
Product Name
Juneng Machinery Factory
Centrifuge
Juneng Machinery (China) Co.,Ltd(Nanjing)
Dryer
Juneng Machinery (China) Co.,Ltd(Nanjing)

 

 

Juneng Machinery (China)Co., Ltd., established in 2006, is a professional manufacturer engaged in the research, development, production, sale and service of Filter, Separator, Decanter centrifuge and pump. We have four factories which located in Nanjing and Yixing City with convenient transportation access.

 

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including Filter, Separator, Decanter centrifuge and pump.

Hot Products

DL-4P2S Food Grade Stainless Steel Vertical Multifunction Bag Filters With PP Filter Bag Description ...
SS304 High-efficiency Vertical Pressure Bag Filter with reinforced filter gauze Description DL bag...
Disc separator centrifuge for separation and purification of cell proteins as well as blood plasma ...
Stainless steel belt drive disc separator centrifuge for the extract Product Description Biopharmace...
ZX filter diatomaceous earth precision filter with small size, high efficiency, low filtration cost ...
ZX-110 Carbon Steel/Stainless Steel Self Cleaning Filtering Core Filter For Copper Sulfate 0.4Mpa ...