Active Member
|
[China]
Address: NO.1403,Sector A,YaoHua Plaza,Changjiang Road N.,Tianyuan Distict,Zhuzhou City,Hunan412007,China
Contact name:Nat Zhou
HUNAN GOLDEN GLOBE I AND E OED CO.,LTD. |
|
|
Soil Nailing Rock Bolts Hollow Anchor R32N/21 Roof Self Drilling Rock Anchors
Description:
Self drilling anchor system is mainly used in slope stabilization, tunneling pre-support, foundations with micropiles, it is also widely used in the railway system, metro project etc. It can be installed in sites with weak rocks, loose soil, weathered layer, sand with stone layer and so difficult to create a hole in complex formations. The unconsolidated ground condition favor the self-drilling anchor bolt technique for fast and simple method of installation compared to the traditional method.|
Features:
1, Self drilling anchor system has two performances: the one is drilling, the other one is grouting. It features a hollow bore for flushing, or simultaneous drilling and grouting.
2, Self drilling anchor system is reliable, efficient and convenient, which makes high piling output possible.
3, We can also make the Hot-Dip Galvanizing Corrosion Protection according to EN ISO1461
Specification:
Outer Diameter:40mm
Inner Diameter:16mm
Utimate Load:660KN
Yield load:525KN
Weight:7.1kg/meter
Tunnelling Ground engineering:
1. Face stabilization
2. Radial systematic anchoring
3. Foundation for avalanche protect
4. Stabilization of tunnel portals
5. Spilling
6. Root piling
Hollow anchor bar technical data:
| Size | O.D(mm) | I.D(mm) | Ultimate Load(KN) | Yield Load(KN) | Weight(kg/meter) |
| R25N-14 | 25.0 | 14.0 | 200 | 150 | 2.3 |
| R32L-22 | 32.0 | 22.0 | 220 | 180 | 2.8 |
| R32N-21 | 32.0 | 21.0 | 280 | 230 | 2.9 |
| R32N-18.5 | 32.0 | 18.5 | 280 | 230 | 3.4 |
| R32S-17.5 | 32.0 | 17.5 | 360 | 280 | 3.5 |
| R32S-15 | 32.0 | 15 | 360 | 280 | 4.1 |
| R38N-21 | 38.0 | 21.0 | 500 | 400 | 4.8 |
| R38N-19 | 38.0 | 19.0 | 500 | 400 | 5.5 |
| R51L-38 | 51.0 | 38.0 | 550 | 450 | 6.0 |
| R51L-36 | 51.0 | 36.0 | 550 | 450 | 7.6 |
| R51N-36 | 51.0 | 36.0 | 800 | 630 | 7.6 |
| R51N-33 | 51.0 | 33.0 | 800 | 630 | 8.4 |
| T76N-49 | 76.0 | 49.0 | 1600 | 1200 | 16.5 |
| T76S-45 | 76.0 | 45.0 | 1900 | 1500 | 19 |
| T30-11 | 30.0 | 11.0 | 320 | 260 | 3.3 |
| T30-14 | 30.0 | 14.0 | 275 | 220 | 2.9 |
| T40-16 | 40.0 | 16.0 | 660 | 525 | 7.1 |
| T40-20 | 40.0 | 20.0 | 540 | 425 | 5.6 |
| T52-26 | 52.0 | 26.0 | 930 | 730 | 10 |
| T73-56 | 73.0 | 56.0 | 1035 | 830 | 10.8 |
| T73-53 | 73.0 | 53.0 | 1160 | 970 | 14 |
| T73-45 | 73.0 | 45.0 | 1600 | 1270 | 17.5 |
| T103-78 | 103.0 | 78.0 | 2270 | 1800 | 25 |
| T103-51 | 103.0 | 51.0 | 3660 | 2670 | 44 |
| Steel grade | Acc. to EN10083-1 / EN10210-1 | ||||
| Thread direction | Left hand / Right hand | ||||
| Thread standard | ISO 10208 / ISO1720 / Other international standards | ||||
