Home Companies Hunan Hi-soon Supply Chain Co.

HEV 2011 Lexus Rx450h Battery 6500mAh 288V High Guaranteed Performance

Active Member

Contact Us

[China]

Address: Room 305,Changsha International Commerical center, Changsha Hi-tech Industry Zone, Changsha ,Hunan

Contact name:Aaron Xiang

Hunan Hi-soon Supply Chain Co.

HEV 2011 Lexus Rx450h Battery 6500mAh 288V High Guaranteed Performance

Country/Region	china
City & Province	changsha hunan

Product Details

Hyno energy. Original Factory HEV Battery Replacement Fit For Lexus RX450H (2010-). 6500mAh 288V, guaranteed performance

SCOPE

This specification is applicable to Ni MH battery for hybrid produced by Hunan Hi-soon Supply Chain Co., Ltd.,

Model: Hyno RX450H 288

Suitable for: Lexus RX450H (2010-).

RATINGS

No.	Description	Unit	Specification	Condition
1	Nominal Voltage	V	288
2	Operating Voltage	V	204.0～326.4
3	Nominal capacity	mAh	6500	Standard charge / discharge
4	Minimum capacity	mAh	6000	Standard charge / discharge
5	Nominal Energy	Wh	1728	1 hour rate
6	Weight	Kg	35±0.1	Standard environment,Accuracy±0.05g Electronic scale
7	Power Density	W/kg	＞850
8	Energy Density	Wh/kg	＞43
9	Max. continuous discharge current	C	20	20℃～45℃
10	Max. continuous charge current	C	15	20℃～45℃
11	Storage Temperature	℃	-20～35
12	Operating Temperature	℃	-30～55

PERFORMANCE module only

Tests should be done within one month of receiving the goods under the following conditions.

Test condition

Temperature:20±5℃

Relative Humidity:65±20%

Atmospheric Pressure:86～106kPa

Standard charge discharge specification

Discharge: 6000mA (1C) to 168.0V

Charge: 6000mA (1C)×1hrs,1200mA (0.2C)×1hrs

Discharge: 6000mA (1C) to 12.0V

No.	Test	Unit	Description	Condition	Note
1	Open circuit voltage (OCV)	V	≥15	Within 1h after charging
2	Internal resistance (DC-IR)	mΩ	≤32	50%SOC
3	Internal Impedance (AC-IR)	mΩ	≤14.2	1kHz
4	Self -discharge rate	%	＜18		55±2℃ rest 3days, 20±2℃ rest 7days
5	Energy Efficiency	%	≥85	25℃
6	Volumetric Efficiency	%	＞95	25℃
7	Cycle Life	Week	＞3000	80%DOD	Charge to 90%, discharge to 10%

GUARANTEE

Product fabrication and material defects are guaranteed within 2 years.

Recommendations: the company's products have been filled 30-90% power in the factory, depending on the shipping distance and packing conditions. When capacity measurement, discharge with 1C to 12.6V/ stick; then charge/discharge with the specified current to test capacity. If the stock reach or exceed 2 months, discharge with 1C to 14.4V/ stick; Then charge with 1C for 54min, 0.2C charge for 1hrs, rest 20min, discharge with 1C to 12.6V/ stick, after 3 cycles; Then charge/discharge with the specified current to test capacity.

For the first use, the standard charge method is recommended to avoid damage to the battery.

CAUTION

When charging the battery, please charge in accordance with the charging method in the product specification. Use the specified charger in the specified temperature range. Do not reverse charge, do not exceed the required charging current, and do not exceed the required charging time. Do not charge only with limited voltage and limited current

Do not put the battery into the fire or heating it
Do not connect the positive and negative pole with conductive substances such as metals.
Do not dissect the battery.
Do not refit or damage batteries.
Do not solder battery.
Do not contacting the battery with water, sea water, or other oxidants.
Do not hit, puncture or shock battery.
Do not use batteries inconsistent with the equipment.
The inside strong alkali with high corrosiveness may burn people. If alkali is hitting eyes, skin or clothing, please drastically clean it with tap water or other clean water and get medical treatment straight away.
If the battery does not work properly in the equipment, please refer to the equipment warning and use manual.