Active Member
|
[China]
Address: No. 1766, Xinluo Street, Lixia District, Jinan City, Shandong Province, China
Contact name:Jessica
Shandong Nicole Technology Co., Ltd. |
|
|
Commercial Dehydrator Heat Pump Seafood Dryer Fish Laboratory Hot Air Drying Oven
Application of Heat Pump / Hot Air Drying Machine:
This equipment is suitable for drying bedding in hotels, seafood, vegetable dehydration, black fungus, melon seeds, peanuts, fruits and vegetables, meat products, casings, tobacco leaves, leather, mushrooms, wolfberry, dried fruit, mosquito coils, tribute incense, fabrics, Clothing, grains, dried noodles, yuba, fertilizers, medicines, Chinese medicinal materials, metallurgical products, mining by-products, chemical products, flue gas desulfurization gypsum, clay, grass, flue-cured tobacco, pulverized coal, coal slime, lignite, paper products, wood, seeds , sludge, gypsum, hardware products, etc.
The heat pump dryer can meet several important requirements for seafood drying
1. Temperature - The drying of seafood generally requires a relatively low temperature to avoid high temperature affecting the quality of the product after drying.
2. Humidity - the general water content of seafood is relatively large. Therefore, controlling the amount of moisture removal is an important factor in determining the quality of drying. In addition, because the moisture of seafood exists in fat and oil, dehydration is more difficult, and it is critical to control the dehydration speed.
3. Drying time - seafood drying generally has a long cycle, and rapid drying will generally destroy the drying quality;
4. Color - It is very important to maintain the color of seafood after drying;
5. Circulating air - seafood drying generally requires a large circulating air volume and a relatively high wind speed to avoid water vapor staying on the surface of the material
Process composition:
The heat pump dryer is mainly composed of four parts: evaporator (outer unit), compressor, condenser (inner unit) and expansion valve. The heat is released in the indoor drying room) → throttling → re-evaporation thermodynamic cycle process, so that the heat in the external low temperature environment is transferred to the drying room, and the refrigerant circulates in the system under the action of the compressor.
It completes the gaseous boosting and heating process in the
compressor (the temperature is as high as 100°C), it enters the
inner unit and releases high temperature heat to heat the air in
the drying room, and at the same time, it is cooled and converted
into liquid state. When it runs to the outer unit , Through
throttling and depressurization, the liquid quickly absorbs heat
and evaporates into a gaseous state again, and the temperature can
be lowered to 15℃~-15℃. At this time, the air around the heat
absorber will continuously transfer heat to the refrigerant.
The heating efficiency of the high-temperature heat pump dryer is
much higher than that of other heating equipment. It can be seen
that using a high-temperature heat pump dryer as a drying device
can save energy, and at the same time reduce the emissions of
pollutants such as carbon dioxide, and achieve the effect of energy
saving and emission reduction. .
Technical Specifications:
| MODEL | NT - 1.5P | NT- 3P | NT- 8P | NT- 15P | NT- 15P2 |
| POWER | 1.9 kw | 2.4 kw | 6.4 kw | 12 kw | 24 kw |
| AUXILIARY ELECTRIC HEATING POWER | 2 kw | 3 kw | 12 kw | 24 kw | 48 kw |
| LOADING CAPACITY | 80-100 kgs | 250-450 kgs | 600-1000 kgs | 1500-2000 kgs | 4000 kgs |
| TROLLEY | / | 4 | 6 | 15 | 30 |
| TRAY QTY | 18 trays | 96 trays | 144 trays | 360 trays | 720 trays |
| TRAY SIZE (MM) | 680*710 | 430*730 | 600*800 | 600*800 | 600*800 |
| CHAMBER DIMENSION (M) | 1.27*0.76*1.85 | 3.3*2*2.2 | 5.6*2.2*2.7 | 8*3*2.8 | 8*5.9*2.8 |
| TRAY MATERIAL | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Payment terms:
T/T, L/C, Western Union, MoneyGram or negotiable.
Packing and Shipping:
1. Plastic film as inner packaging
2. Formal export packaging or packaging according to customer requirements
3. Shipping by sea, land or rail.
Choose the best shipping method according to the actual situation or customer requirements
FAQ
Q: How long is your production cycle?
A: Usually 7-25 working days, the exactly delivery time is depending on the quantity and your ordering time.
Q: Can you supply OEM or ODM?
A: Of course we can supply it. We are manufacturer, we can manufacture the equipments according to your exactly requirements.
Q: How is the payment?
A: T/T, L/C or other formal import and export payment method.
Q: How long is your warranty period?
A: One year after commissioning is completed.
Q: Can you help design the entire process line?
A: Of course, our experienced engineers and technicians can help you arrange the layout and installation of the entire production line according to the actual situation such as your workshop layout.
Q: How to install?
A: Smaller model less than 40KW microwave dryer will be loaded in full set, so that you can run it only by connect the main power in your factory. For bigger model, due to the epidemic, we can currently provide online guidance services by experienced engineers. If you need on-site installation, we can apply to the government for installation abroad and calculate all the cost to customers.
Q: Will you help us if we have any problems in future production?
A: It is necessary, you can contact me through mobile phone, WhatsApp, etc. We are always at your service. We will help resolve your issue as soon as possible
