Active Member
|
[China]
Address: Room H,15/F,Siu King Building,6 On Wah Street,Ngau Tau Kok,Kowloon,Hongkong.
Contact name:Cathy
H-LIN INTERNATIONAL (HK) LIMITED |
|
|
FTTH fiber optic MPO Aluminum module 24cores with MTP to LC trunk cable
Product application:
MPO / MTP - LC pre-termination module box, mainly is the trunk
cable terminal 12 core MPO connector branch into a dual-core
conventional connector. The front end of the module box is the LC
adapter (flange) port. Twelve duplex or six quadruple adapters are
usually used, and two MPO or MTP adapters are installed on the
back. In the module box, the front LC duplex adapter (flange) is
directly connected with the back MPO or MTP adapter to form an
integral whole for the transfer skipping fiber. Each independent
MPO/MTP-LC pre-terminal module box is placed in the fiber optic
wiring rack to form a complete MPO/MTP-LC fiber optic wiring rack
(box).
Product characteristics:
1, convert the 12 core MPO/MTP connector branch to the LC duplex
connector.
2, low loss connection, easy to play the large transmission
performance of optical fiber.
3, the front panel is equipped with LC adapters, and the rear panel
is equipped with MPO/MTP adapters.
4. The box is designed scientifically, using high-quality
engineering plastics and aluminum alloy materials, coated with
electrostatic spraying, beautiful and simple appearance, easy to
use;
5, all ports are marked on the front end, easy to identify and
find.
Product composition
A 24 core distribution box Cassette
Two MTP adapters
Twelve dual core LC adapters (without flanges)
Two 12 core MPO-LC jumpers, optional MPO or MTP type, MPO is male
or female designated by the customer.
Product advantages
1. meet international standards IEC-61754-7 and TIA-604-5 (FOCIS5)
2.100% ensure stable performance through FLUKE LINK standard
testing.
3. there are no defects or scratches on the surface.
4. if there is any quality problem, we can replace it free of
charge.
Product performance
Insertion loss: single mode less than 0.18dB
Return loss: PC > 45dB UPC > 50dB, APC > 60dB; MPO insert
more than 500 times, insertion loss variation <0.20dB
Tensile strength: 45Kg (except for 0.9SM fiber)
MPO/MTP high density optical fiber pre termination module box
(module)
- cloud computing big data era optical fiber products
| Techinical Parameter: | |||
| MPO/MTP Adapter | |||
| Fiber type | SM | MM | |
| IL | Typical(dB) | 0.3 | 0.3 |
| big(dB) | 0.65 | 0.65 | |
| RL(dB) | ≥50(PC) | ≥45(PC) | |
| ≥55(APC) | |||
| Female male pin | Male:with pin Female:without pin | ||
| Durability | 500TIMES | ||
| Working teperature(℃) | －40 ～+80 | ||
| Test wavelength(nm) | 1310 | 850 | |
| LC adapter | |||
| Fiber type | SM | MM | |
| Connector type | PC | APC | PC |
| IL(dB) | ≤0.3 | ||
| RL(dB) | ≥50 | ≥60 | ≥40 |
| Durability | 1000TIMES | ||
| Working teperature(℃) | －40 ～+80 | ||
