Full set FTTH fiber optic splicing tools kit with fiber optic cleaver FC-6S and Optical Power Meter
Product description
This ftth tool kit include following items:
1 x Optical Power Meter
1 x Fiber Cleaver FC-6S
1 x Miller pilers
1 x Fiber Optic Stripper/Model: CFS-2
1 x Red Laser Pointed VFL
1 x Fixed length device
1 x Black Carry Bag
1 x Guide bar
1 x Alcohol Bump Bottle
1 x Wire Stripper
Details Introduction
optical power meter 5km
- Calibration wavelength: 800 ~ 1700nm
- Measuring range: -70 ~ +3dBm
- Linearity: 0.01dB
- Display resolution: 0.01dB
- Wave ID: 850, 980, 1300, 1310, 1490, 1550, 1625 nm
- Power Adapter: 9V/1000mA
- Working time: 40h
- Working temperature: -10 ~ 60 centigrade
- Storage temperature: -25 ~ 70 Celsius
- Power Supply: 3 x AA Battery (Not Included)
optical pen 5km:
- Imported laser head, High thermal conductivity
- Aluninum alloy case, good durability
- the ceramic die can be replaced
FC-6S Fiber cleaver:
- Fiber diameter: 125um
- Coating diameter: 250um – 900um
- Typical splitter angle: 0.5 degrees
- Adjust the peeling length is: 5~20mm
- Length of the slit: 10mm
- Blade Lifetime: 36,000 columns (3,000 per blade position)
Double mouth Miller Pliers
- 250 um coated layer of 125 um fiber with A.
- Opening the top of the B. 1.98mm can be used for stripping fiber
outer sheath
- The open hole of the type V and 140 um on the edge of the
- Clamp can be used to strip the 250 um layer of 125 um fiber
- Jaw factory has been adjusted, shall not be adjusted
- Will not damage the fiber
- A ll the cutting cross section has precise mechanical tolerances to
ensure a clean and smooth operation
- According to the handle ergonomic design, comfort grip
- Does not use the blade, locked in a closed state
Wire stripper
- The use of temperature is -20 ° C ~ 50 °C
- Factory pre-set, no need to adjust this stripper again to prevent
fiber scratch; cutting blade precision positioning, quenching and
tempering treatment, anti-rust primer.
- If not use, set the blade lock in the closed state.
- For stripping 250 micron buffer coating to expose 125 micron
cladded fiber
- Second hole for stripping 2-3mm fiber jackets
- 140 μm diameter hole and V-opening in blade allows removal of 250
micron buffer coating from 125 micron fiber
- Pre-set at the factory – no adjustments needed
- Will not scratch or nick glass fiber
- All stripping surfaces are manufactured to precise tolerances to
assure clean, smooth strips Comfort-grip, ergonomic handles
Squeezed type alcohol bottle and other Accessories
FUll Set
