|
[China]
Trade Verify
Address: 2F, G4 of TianFu Software Park, Chengdu, China.
Contact name:Jerry
Chengdu Shuwei Communication Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
| ASIC Chip Plus TCAM CPU |
| 80Gbps intelligent traffic processing capabilities | |
| 10GE Acquisition |
| 10GE 8 ports, Rx/Tx duplex processing, up to 80 Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing | |
| Data Replication |
| Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports | |
| Data Aggregation |
| Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports | |
| Data Distribution |
| Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules | |
| Data Filtering |
| Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of filtering rules | |
| Load Balance |
| Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing | |
| UDF Match |
| Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration | |
| VLAN Tagged |
| Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration | |
| VLAN Replaced |
| Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration | |
| VLAN Replaced |
| Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration | |
| MAC Address Replacement |
| Supported the replacement of the destination MAC address in the original data packet, which can be implemented according to the user's configuration | |
| 3G/4G Mobile Protocol Recognition/Classification |
| Supported to identify mobile network elements such as (Gb, Gn, IuPS, S1-MME, S1-U, X2-U, S3, S4, S5, S6a, S11, etc. interface). You can implement traffic output policies based on features such as GTPV1-C, GTPV1-U, GTPV2-C, SCTP, and S1-AP based on user configurations | |
| Ports Healthy Detection |
| Supported real-time detection of the service process health of the back-end monitoring and analysis equipment connected to different output ports. When the service process fails, the faulty device is automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing | |
| VLAN, MPLS Untagged |
| Supported the VLAN, MPLS header in the original data packet is stripped and output | |
| Tunneling Protocol Identify |
| Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel | |
| Unified Control Platform |
| Supported NetTAP® Matrix-SDN Visual Control Platform Access | |
| 1+1 Redundant Power System(RPS) |
| Supported 1+1 Dual Redundant Power System |
5.Typical Application Structures
5.1 N*10GE to 10GE Data Aggregation Application(as following)
5.2 GE/10GE Hybrid Access Application(as following)
6.Specifications
NT-FTAP-8XE NetTAP® Network Packet Broker NPB Functional Parameters | ||
| Network Interface | 10GE | 8*10GE/GE SFP+ slot; support single/multiple mode fiber |
| Out-of-Band MGT interface | 1*10/100/1000M electrical port | |
| Deploy mode | 10G optical splitting | Support 4*10G bidirectional link traffic acquisition； |
| 10G mirror acquisition | Support max to 8*10G mirror traffic inputting | |
| Optical inputting | Input port supports single fiber splitting input; | |
| Port multiplexing | Support input port as output port; | |
| Flow output | Support 8/16/24 channels of 10GE flow output; | |
| Traffic aggregating/duplicating/distribution | Support | |
| QTYs of links supporting traffic duplicating/aggregating | 1->N way traffic replication (N<8) N->1 channel traffic aggregation (N<8) Group G (M->N way) grouped traffic replication aggregation [ G*(M+N) < 8 ] | |
| Port-based traffic identification diverting | Support | |
| port five tuple traffic identification diverting | Support | |
| Traffic identification divert strategy based on key tag of protocol header | Support | |
| Ethernet encapsulation unrelated support | support | |
| CONSOLE MGT | support | |
| IP/WEB MGT | support | |
| SNMP MGT | support | |
| TELNET/SSH MGT | support | |
| SYSLOG protocol | support | |
| User authentication | Based on users’ password authentication | |
| Electric(1+1 Redundant Power System-RPS) | Rate power supply voltage | AC110-240V/DC-48V(optional) |
| Rate power supply frequency | AC-50HZ | |
| Rate input current | AC-3A / DC-10A | |
| Rate power | 140W/150W/150W | |
| Environment | Working temperature | 0－50℃ |
| Storage temperature | -20-70℃ | |
| Working humidity | 10%-95%, no condensation | |
| User Configuration | Console configuration | RS232 interface, 9600,8,N,1 |
| Password authentication | support | |
| Height of Chassis | (U) | 1U 445mm*44mm*402mm |
7.Order Information
NT-FTAP-8XE 8*10GE/GE SFP+ ports, max 80Gbps
NT-FTAP-8 16 24XE Network TAP NPB.pdf
