Matrix Network Packet Broker Plug in Module for Data Center Traffic
Collection
Background Introduction
With the acceleration of carrier broadband construction and the
rapid development of 3G, 4G, and 5G networks, and with the
popularity and development of big data and cloud computing
technologies, data traffic is growing, and the bandwidth
requirements for backbone networks and core networks are
increasing. Since 2013, the major operators have begun to gradually
upgrade the backbone network. The core backbone network
transmission link media starts to be expanded from 10GPOS and
40GPOS links to 100G Ethernet links. It will inevitably lead to the
continuous updating of big data collection and analysis technology.
In the face of 100GE link environment with high bandwidth capacity,
how to effectively meet the requirements of various national
security, network security monitoring, operator intelligent
pipeline DPI data collection and analysis will become a hot spot in
the field of data acquisition and analysis.
Chengdu Shuwei Communication is following the development direction
of the Internet and develop the MATRIX-TCA-CG Traffic
Acquisition(Traffic Capture) Visibility System, and dedicated
to the traffic collection and visual analysis application
requirements on 1GE, 10GE, 10G/40G POS, 40GE and 100GE links. The
MATRIX-TCA-CG integrates free-steering output functions such as
network flow collection/acquisition, aggregation, filtering,
forwarding/distribution, and load balancing and provides an
efficient solution for the flow analysis.
Matrix-TCA-CG is a network data visualization control device for
high density and large flow of 10G/40G/100G.
Matrix-TCA-CG is specially designed for the data collection of 10GE
40GE and 100GE links distributed intensively in operators mobile
Internet export, IDC export, provincial network and backbone.
Based on ATCA standard architecture, MATRIX-TCA-CG has high
carrier-level reliability and strong expansibility which can
smoothly configure the functional board CARDS to cope with port
demand scenarios of various specifications and sizes.
![](http://img.everychina.com/nimg/de/42/7cef321f9c596540cf5a6958aa8a.jpg)
The NTCA-CHS-16U14S is a 16U standard rack height. The chassis
adopts the horizontal insertion service slot mode. The whole
machine supports 14 card slots, including 4 switching slots and 10
service slots. Each slot provides 300W cooling capacity, the
chassis uses a pull-type cooling air duct to provide good heat
dissipation performance for the whole machine. The backplane adopts
a dual-star architecture, providing independent 100Gbps backplane
bandwidth for each switch slot to the service slot. Fully 4 switch
cards can provide 400G backplane cross-board bandwidth application
per service slot.
Carrier–class System Architecture
Advanced specification PICMG 3.0 R2.0
RoHs,Designed for CE,FCC,NEBS Level 3
Standard Dual Dual Star 100G speed backplane
Rich Interface Types
Supported high density 10G, 40G, 100G link interface
Supported all port line speed work without packet loss
Rich Network Traffic Processing Mechanism
Supported 1->N, M-> N, M-> N channels traffic replication
& aggregation
Supported packet filtering matching, including SIP, DIP, SP, DP,
protocol number, arbitrary position feature code identification,
input interface and other elements of flexible combination
filtering conditions
Supported DPI deep message analysis and processing
Supported GTP, GRE and other tunnel protocol IP identification
& distribution
Supported multiple rule combinations
Supported the number of rules above 100,000 level
Supported filtering rule black and white list
Load Balance
Supported dynamic load balancing or custom load balancing in/across
single board
Supported the hash load balancing calculation of multiple
combination conditions
Supported load balancing arbitrary binding of output port group
members
Flexible Port Collocation
Supported all ports as input, output port by user-defined
Supported for members of the same port group not restricted by port
types
Supported any binding of input and output port groups in single
board/cross board
Large-capacity Network Visibility 10G/40G/100G Capture, Aggregation
and Distribution Application
![](http://img.everychina.com/nimg/36/90/4a7c8617c82c7d23c94d8f4acee7.jpg)
Span deployment the high-performance, high-capacity MATRIX-TCA-CG
traffic acquisition visibility system to uniformly collect data
traffic of any node location and any link type (10G/40G/100G) on
the entire network, and then data traffic can be transmitted
through the system. The size, structure, relationship, etc. are
collated and analyzed. After the invisible data signal is converted
into a visible entity, the user can copy, aggregate, and offload
the required target data to each back-end system for depth
detection and analysis according to system requirements.
Network Packet Broker Specification and Module Type
Component type | Product Model | Basic Parameter | Remarks |
Chassis | NTCA-CHS-16U14S-DC | Height:16U,14 slots, ATCA Chassis, double double star 100G
backplane, 4 high voltage DC(240VDC~280VDC) input,4* 3+1 redundant
3000W power modular | Must choose one |
NTCA-CHS-16U14S-AC | Height:16U,14 slots, ATCA Chassis, double star 100G backplane, 4
high voltage AC(240VDC~280VDC) input,4* 3+1 redundant 2000W power
modular |
Service card | NT-TCA-SCG10 | 100G exchange card,10*QSFP28 interface | Choose according to actual business needs |
NT-TCA-CG10 | 100G service card,10*QSFP28 interface |
NT-TCA-XG24 | 10G service card,24*SFP+ interface |
NT-TCA-RTM-CG10 | 100G RTM card,10*QSFP28 interface |
NT-TCA-RTM-EXG24 | 10G RTM card,24*SFP+ interface |
| |
TCA Visibility Embedded software system | NT-TCA-SOFT-PKG | | must |
Machine Specification
Items | Specifications |
Chassis size | NTCA-CHS-7U7S-DC:310.45mm(H) × 482.6mm(W)× 443.6mm(D) |
NTCA-CHS-7U7S-AC:310.45mm(H) × 482.6mm(W)× 443.6mm(D) |
NTCA-CHS-16U14S-DC:708.35 mm(H) × 482.6mm(W)× 502.15mm(D) |
NTCA-CHS-16U14S-AC:708.35 mm(H) × 482.6mm(W)× 502.15mm(D) |
Adapter chassis and power | Power supply |
NTCA-CHS-7U7S-DC:High voltage DC(240VDC~280VDC) |
NTCA-CHS-7U7S-AC:220V AC |
NTCA-CHS-16U14S-DC:High voltage DC(240VDC~280VDC) |
NTCA-CHS-16U14S-AC:220V AC |
Power: |
NTCA-CHS-7U7S-DC:Full configuration maximum power consumption <
3000W |
NTCA-CHS-7U7S-AC:Full configuration maximum power consumption <
3000W |
NTCA-CHS-16U14S-DC:Full configuration maximum power consumption
< 5000W |
NTCA-CHS-16U14S-AC:Full configuration maximum power consumption
< 5000W |
Environment requirement | Working temperature:0℃~50℃ |
Storage temperature:-20℃~80℃ |
Working humidity:5%~95%,Non-condensation |
Standard Certification | Advanced®specification PICMG® 3.0 R2.0 |
RoHs,Designed for CE,FCC,NEBS Level 3 |