|
[China]
Trade Verify
Address: 2E&3E,NO.256,MING XIN MIDDLE ROAD ,HUTANG TOWN, WUJIN DISTRICT CHANGZHOU, JIANGSU,CHINA
Contact name:Grace Zhuang
Changzhou Chenye Warp Knitting Machinery Co., Ltd. Leave Messages |
|
Verified Suppliers
|
|
|
Slitting Machine For Assisting Warp Knitting Machine To Weave Shading Net And Vegetable Bag
Slitting Extension M/C
This slitting extension machine is located in front and rear of a film slitting extension machine, which is used to slit a HDPE film and extend, then yarns are fed directly to the film slitting extension Machine.
The machine consists mainly of:
Sheet width: 1,200mm.
Opening rollers.
Fixed flat knives with adjustable spacing ring to give strip width of 4.0 - 6.0 mm.
Transport rollers driven by 2 steps change drive.
Winding beam devices of the selvedge yarn.
Main drive: 2 sets machine attached one unit 1.5 kw motor.
Heater: each set machine attached 5 kw.
Main components of the machine | |
Frame part | The frame is composed of left and right main panels, hot bed
support beams, unwinding supports, etc., with stable structure. It
can be placed with a maximum coil diameter of 800mm |
Transmission roller | The slitting and stretching of the film are mainly realized by
three groups of rollers at different speeds through knife rest,
pull roller group, hot plate and pull roller group. |
Tension buffer device | The tension buffer device is composed of a roller, a bracket, a
counterweight, etc. |
Cutting device | The film is cut into suitable width by the slitting device |
