Home Companies HUATEC GROUP CORPORATION

SD Card Portable Ultrasonic Flaw Detector A Scan B Scan FD600 Low Noise

Contact Us

[China]

Trade Verify

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Contact name:Shifen Yuan

HUATEC GROUP CORPORATION

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

SD Card Portable Ultrasonic Flaw Detector A Scan B Scan FD600 Low Noise

Country/Region	china
City & Province	beijing beijing

Product Details

SD card High Resolution Digtal Ultrasonic Flaw Detector A Scan B Scan FD520 with Automated 0 - 120dB gain

Features

 Measurement displaying mode: type A displaying mode
 It is provided with linear reject function, the highest reject is 80% of the screen height;
 switch over arbitrarily among three detecting modes: single-probe , dual-probe ones and through transmission;
 It has gate setting and alarming function. Can set the position and width of gate freely on the screen, and can set alarm for forbidden wave and loss wave respectively;
 500 detecting channels are available with a separate detecting parameter and DAC curve in every channel.
500 A scanned images, parameters and DAC curves can be stored in
 Two input methods, angles and K value.
 Auto-gain
 Automatic generation of DAC curve by standard test block, 30 points can be recorded at most, three adjustable bias curves are generated with the function of Correction.
 Automatic generation of AVG curve by three type of flaw
 Make test videos and Auto playback
 Auto shutdown mode to save power ;
 Can playback the saved images, call out the saved A-scan images from
 Equipped with delete function, with which any data can be deleted from storage zone;
 Two measuring unit: mm/inch;
 Real-time clock;
 Auto-calibration of probe.
 Memory of peaks.
 Can freeze and defreeze waveform and detection parameters;
 Can lock/unlock the system parameters;
 Measuring of sound path and analyze of echo times;
 Can indicate power state in real time;
 RS232 communication port available;
 Having buzzer prompt during operation;
 Compact, light and easy to operate.

Designation	Technical Data
Range of scanning (mm)	Range of scanning (mm):0～10000
D-delay (ms)	D-delay (ms):-20～+3400
P-delay (ms)	P-delay:0.0～99.99 Adjusting steps: 0.01
MTLVEL(m/s)	MTLVEL:1000～9999 7 fixed levels: 2260,2730,3080,3230,4700,5920,6300 Adjusting steps: 1
Working mode	Single probe (receiving and sending), double probe (one for receiving and another for sending), transmission (transmission probe)
Frequency of repeating transmitting (MHz)	0.4–20
Gain adjustment (dB)	0～110 Adjusting step: 0.0,0.2,0.5,1,2,6,12
Suppress	0%～80% of screen height, step: 1%
Vertical linear error	Vertical linear error is not more than 3%
Horizontal linear error	Not more than 0.2% in the scanning range
Allowance of detection sensitivity	≥62 dB
Dynamic range	≥32 dB
Alarm	Three modes, i.e. forbidden wave, loss wave and auto
Display	Display: high-brightness graphic lattice
A-Scan display area	A-Scan display freezing and de-freezing A-Scan filling
Waveform displaying way	full wave
Detection channel	10
Data save	500 A-Scan images (including setting of instrument)
Standard communication interface with PC	RS232
Measuring unit	mm/inch
Battery	Li battery 4×3.6V 5000mAh
Power adaptor	Input 100V～240V/50Hz～60Hz Output 9V～12VDC/3A～4A
Working temperature	0℃～40℃
Working humidity	20%～90%
Port type	BNC
Overall dimension (mm)	210×150×45
Weight (kg)	1.0