HUATEC GROUP CORPORATION |
Verified Suppliers
|
|
Internal and External Broken Wire Tester Elevator Steel Wire Rope Fracture Elevator Wire Rope Testing
1. LF testing sensitivity of local injury detection
The detector detects the minimum metal cross-sectional area change
and the minimum size of damage length corresponding to local
damage.
2. LMA testing sensitivity of metal cross-sectional area loss
detection
The detector detects the minimum metal cross-sectional area change
and the minimum size of damage length corresponding to the loss of
metal cross-sectional area.
3. LMA repeatability error of metal cross-sectional area loss
Within the range of the instrument and under the same detection
environment and conditions, the maximum value of the random error
obtained by repeated continuous measurement of the variation of the
same metal section area in the same sample.
4. LMA linearity error of metal cross-section area loss
Within the range of the instrument, the absolute value of the
maximum deviation between the measured curve of the metal
cross-sectional area of the sample tested by the instrument and the
measured value of the measured cross-sectional area of the group of
metals.
5. LMA error of indication of metal cross-sectional area loss
Within the range of the instrument, the loss of the metal
cross-sectional area measured by the instrument is subtracted from
the actual loss of the metal cross-sectional area.
6. Linear error of Wire Rope LMA linearity error of metal
cross-section loss
Within the range of the instrument, the absolute value of the
maximum deviation between the metal cross-sectional area loss
measured by the detector and the calibration curve fitted by a
group of metal cross-sectional area loss measured by the instrument
under the condition of the same metal cross-sectional area loss
length.
7. Resolution of testing distance
The detector can detect the minimum distance of resolution.
8. Dual-function instrument
The detector can detect and show changes in the metal
cross-sectional area loss (LMA) on one channel and local damage
(LF) on the other. The signal recording device of this detector can
be a computer, graph recorder or other matching equipment.
9. Single-function instrument
The detector cannot simultaneously detect and display the change of
metal cross-sectional area loss and local damage, but can only
detect and display one of them. The recording signal device of this
detector can be computer, graph recorder or other matching
equipment.
10. Wire rope electromagnetic tester
The principle and composition of the detector meet the requirements
of GB/T 21837-2008 standard, and have the functions of detection
distance display, data storage or recording.
Wire rope flaw detector is a collection of advanced flaw detection technology at home and abroad. Using digital processing and network technology, a portable intelligent wire rope electromagnetic nondestructive testing instrument is developed. It is widely used in mining, cableway, lifting equipment, elevator, port machinery, cable bridge and other fields.
Wire rope flaw detector can be real-time display of the internal and external broken wires, corrosion, wear, metallic cross-sectional area changes of quantitative values, according to the current standards and regulations make the diagnosis report and solutions, has realized the rapid diagnosis of wire rope damage, reduce double wire rope detection time, detection does not affect the normal production, solve the labor, low efficiency of inspection line, unable to test the internal damage and artificial factors and so on. The instrument is easy to carry, simple to operate, and can be operated by operators after simple training, with high detection accuracy, good repeatability and accurate damage location.
Technical indicators
Product Overview
◆ can on-line test the wire rope internal and external broken wire, wear, corrosion, deformation, loose strands, jump wire, material changes and other defects.
◆ the test results can meet the standards of different industries and can be displayed in the form of the number of broken wires and the ratio of the broken wire area to the total broken wire area.
◆ computer USB interface for direct sampling, processing and analysis, with online sound and light alarm and real-time display results.
◆ sensor circular structure, circumferential surround, axial magnetization, magnetization of the wire rope to saturation state.
◆ The sensor adopts alloy aluminum shell, which is waterproof, dustproof, shockproof and moisture-proof.
◆ stable work, reliable performance, high detection accuracy, strong anti-interference performance, accurate data.
◆ software to adapt to Windows98/2000 / xp/Vista/windows7 various computer operating systems
◆ in accordance with the provisions of the national metrology law and the national production safety law, each instrument shall be inspected by the national metrology institute as a third party in accordance with the American standard ASTM1571, and the test report shall be issued to obtain the legal qualification.
◆ widely used in mining, ropeway, lifting equipment, elevator, port machinery, cable bridge and other fields.
Technical core and legal qualification
1. Virtual instrument: infinite uncertainty of wire rope.Only by using virtual instrument technology, replacing traditional instrument with software, and using computer to directly sample, we can ensure no missed inspection and wrong judgment, just like watching a movie, scanning the whole process of wire rope, the results are accurate and repeatable.
2. Three-determination instrument: according to the national standards for scrap of wire rope in different industries, this product applies electromagnetic qualitative, quantitative, positioning, online nondestructive testing of wire rope internal and external broken wire, rust, wear, metal sectional area change, loose strands, jumping wire, deformation, material abnormalities and other defects.
3. Legal instruments: according to the provisions of the national metrology law and the national production safety law, each instrument is inspected by the national metrology institute according to the American standard of astm1571-2006 and GB/ t21387-2008 as a third party, and the test report is issued to obtain the legal qualification.
1. Elevator wire rope diameter is 8-16mm
2. The total model of wire rope computer flaw detector is E15/E20
The serial number | Content | Qty. | Comment | |
The sensing unit | 1. | E15 Excitation polymagnetic sampling sensor(Automatic distance positioning to form an encoder) | 1 | 8-16mm All kinds of elevator wire rope can be tested (single rope) |
2. | E20 Excitation polymagnetic sampling sensor (Automatic distance positioning to form an encoder) | 1 | 8-16mm All kinds of elevator wire rope can be tested (multi-rope) | |
conversion unit | 3. | RADFDigital converter (Online monitoring and real-time alarm) | 1 | The module is imported from USA |
4. | 8344 Signal switching | 1 | ||
5. | USB Serial converter line | 1 | ||
To deal with unit | 6. | V3.0 Version Processing package | 1 | |
7. | Laptop | 1 | Including computer bag plus mouse | |
The attachment | 8. | Standard packing case | 1 | |
9. | Safety line | 1 | ||
10. | Issued by the national legal metrological institution Third-party test report | 1 | The use of the instrument obtains legal qualification |