Home Companies HUATEC GROUP CORPORATION

Fixed Frequency 110V Or 220V Digital Vibration Calibrator

HUATEC  GROUP  CORPORATION

Contact Us

[China] country

Trade Verify

Address: 7th Floor, Chengyuan Building B, the Mid. Road of Jiancaicheng Haidian Dist.BeiJing,CHINA 100096

Contact name:Shifen Yuan

Inquir Now

HUATEC GROUP CORPORATION

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Fixed Frequency 110V Or 220V Digital Vibration Calibrator

Country/Region china
City & Province beijing beijing
Categories Measuring & Analysing Instrument Processing Services
InquireNow

Product Details

Fixed Frequency 110V Or 220V Digital Vibration Calibrator 


Application for ISO10816 HG-5010 Vibration Calibrator:

1.Can be used to calibrate vibration accelerometer, velocity and proximity transducer and also a vibration measuring instruments. Standard sine signals at frequency 10, 20, 40, 80, 160, 320, 640 and 1280 Hz

2.Can be generated from the calibrator the amplitude of the acceleration, velocity and displacement

3.Can be defined through potentiometers and shown on digital displays. Either horizontal or vertical vibration can be generated.

4.HG-5010 vibration calibrator combines sine signal generator, power amplifier, standard transducer and a shaker in one and features a small volume, high accuracy and easy operation. It can be used either in laboratory or on site.

5. International standards: ISO10816

 

Maximum vibration amplitude and maximum load:

Because of the vibrostand used in HG-5010 Vibration Calibrator is rather small, during the calibration of transducers of different weight under different frequencies the output amplitude of the calibrators are also different. Maximum vibration amplitude and maximum load are related to the maximum acceleration. Maximum velocity and maximum displacement output generated from the calibrator under a certain frequency and with a certain weight of the transducer to be calibrated. The specific figures can be seen in the following table.

Wt

 

Freq

<100g<250g<650g
a(m/S2)v(mm/S)d(μm)a(m/S2)v(mm/S)d(μm)a(m/S2)v(mm/S)d(μm)
10Hz2.52813003.54018004452000
20Hz1585190010601300528640
40Hz6017020003510011001235380
80Hz10014180040603201420110
160Hz7553150352570128.524
320Hz501825301015103.55
640Hz3053203.5261*
1280Hz232*100.9*50.4*

Note: With higher frequency the value of the displacement of vibration is very small so there will be no vibration signal output from the calibrator.

 

Specifications:

Frequency: 10, 20, 40, 80, 160, 320, 640, 1280Hz +0.01%

Unit:

              Acceleration: m/s2 (PEAK)

              Velocity: mm/s (RMS)

              Displacement: um (PK-PK)

Amplitude accuracy:

Acceleration (30m/s2 pk, 80Hz) 40Hz to 320Hz + 0.3dB + 1digit

10Hz to 1280Hz + 0.5dB +1digit

Velocity ( 25mm/sec pk ,80Hz) 40Hz to 320Hz +0.5dB +1digit

Displacement (10μm pk-pk, 80Hz) 40Hz to 320Hz + 0.5dB + 1digit

Proximity probe linearity

Prode: 5mm and 8mm probes Range: 0~4.0mm

Display: 3 1/2 digit display for acceleration, velocity or displacement

Size: 280 x 180 x 250(mm)

Weight: 20lb,9kgs

Temperature: Operation: 0oC to 50 oC

Storage: -20 oC to 70 oC

Humidity: 90% non -condensing


1 Vibration amplitude output display Showing the amplitude of the different vibration signal output of the calibrator
2 Calibration potentiometer
3 Function selecting switch Shifting the output of the calibrator to acceleration, velocity or displacement
4 Potentiometer for adjusting the output amplitude
Adjusting the potentiometer to change the output vibration amplitude
5 Adjusting the the output vibration amplitude slowly
6 The table for fixing the transducer to be calibrated
7 The thread hole for fixing the stand of proximity probe
During the calibration of proximity probe, the stand of the transducer is fixed on the control panel through this thread hole.
8 Power switch 220 VAC
9 Socket for 220 V AC power input
Used for connecting 220 V AC power.
10. Socket for power output
For monitoring the wave shape of the output signal of the power amplifier of the calibrator.
11 Output socket of – 24 V voltage
Providing power at – 24 V for proximitor during the calibration of proximity probe.
12 Frequency selecting switch

Hot Products

HFV-600C LED industrial film viewer is a new product developed by HUATEC Group for the latest ...
HFV-600C LED industrial film viewer is a new product developed by HUATEC Group for the latest ...
HFV-600C LED industrial film viewer is a new product developed by HUATEC Group for the latest ...
HDL-360 Film dryer Technical parameters and specifications ● Drying process: → → Water washing → → ...
Triangle Gloss Meter Model HGM-B206085 Measurement of Paint and Dope Surface Gloss Meter Model HGM...
huatec Rebar detector Location detector HLT-120X Application Range 1,Testing the location, ...