|
[China]
Trade Verify
Address: Shatian Town, Dongguan City, Gaungdong Province, China, postal code 523991,(near Shenzhen & Guangzhou)
Contact name:Marco
ACE MACHINERY CO.,LIMITED |
|
Verified Suppliers
|
|
|
Application
This ACE-V200-L-2C Laminated V Fold Tissue Machine, Interfold Tissue Laminated
Machine is with both point to point glue lamination and 2 colors printing.
It is mainly used to automatically fold, emboss, laminate, print,
cut and count laminated printed interfold dispenser napkins, pop up
napkins, quick napkins, interfold napkins, nonwoven airlaid napkins
and MG paper napkins etc. It adopts vacuum folding style. The
mainly function of this machine is to manufacture easy-to-take one
by one plain, embossed and LOGO printed and laminated interfolded
dispenser napkins and V fold hand paper towels. It has 6 lanes
output and can run at very high speed up to 1000 sheets per minute.
It is an ideal equipment to manufacture high grade away-from-home
customized color printing and laminated tissue paper napkin
products.
Advantage:
1 Laminated V Fold Tissue Machine
2 With both glue lamination and 2 colors printing.
3 high speed up to 1000 sheet/min
4 Embossed and printed and laminated
5 Vacuum fold
6 Use vacuum pump
Quick details:
1 Size 200x165mm (7.87x6.5”)
2 Printed and laminated together
3 Six lanes
4 Interfold Tissue Laminated Machine
5 With both glue lamination and 2 colors printing.
Technical parameters as below
| Model | ACE-V200-L-2C |
| Output type | Laminated V Fold Tissue Machine, Interfold Tissue Laminated Machine |
| Folding speed | 1000 piece/min/lane * 6lanes, depending on the paper quality and napkin size. |
| Raw paper | 13-20g/m2 2-ply, 16-45g/m2 1-ply, wooden pulp paper or MG paper or
nonwoven airlaid. |
| Jumbo roll size | ≤ 1200mm x Φ1200mm (Depends on your napkin size, customized) |
| Napkin size | Open size: 200±2mm x 200/165/140mm Other size, please specify. |
| Folding type | Mechanical folding |
| Embossing unit | 1- Steel to paper(wool), Male to female. (Steel to steel is
available.) |
| Printing unit | 1- Flexo printing type. |
| Point to point Lamination system | a. With 2 complete sets of point to point lamination units. |
| Tension control | Speedless Tension control unit to fit the machine for paper of
different quaity and different gsm. |
F. Point to point glue lamination unit
a. With 2 sets of lamination units.
b. The whole design is copied Italy design.
c. Heavy chrome coating roll
d. Micro-adjustment of nips between the steel roll
e. Anilox roll for glue applicant.
f. Controlled by cylinders
g. Each lamination unit controlled by an independent reducer. When
the machine stops, the motor will start running to rotate the
anilox roll to prevent it getting dry.
G. Printing Section (advanced design.)
1. With two colors flexo-graphic printer section.
2. Printing unit with driven by timing belts to make printing more
precise.
3. Simple and easy adjustment of horizontal and longitudinal
registration by turning hand wheel.
4. With automatic printing roller disconnection device during
machine stop. If the machine stops, the roller will automatically
disconnect with the printing unit, controlled by pneumatic system.
5. The printing plate roller can be adjustable or disassembled from
the printing unit, much easier for the operator to attach the
printing rubber plates or clean the roller.
6. Both sides of Anilox roll & Rubber roll with buffer for
anti-spill cover to stop the ink spilling out of the ink tank and
spraying somewhere.
7. The printer is equipped with cover on the in tank to prevent the
inks spilling out of the ink tanks.
Finished products by this Laminated V Fold Tissue Machine,
Interfold Tissue Laminated Machine:
