|
[China]
Trade Verify
Address: Shatian Town, Dongguan City, Gaungdong Province, China, postal code 523991,(near Shenzhen & Guangzhou)
Contact name:Marco
ACE MACHINERY CO.,LIMITED |
|
Verified Suppliers
|
|
|
Application
This ACE-V200-10L High Speed 6lanes Facial Tissue Machine With Steel To Rubber
Embossing is with both full embossing unit and edge embossing unit. It
is mainly used to automatically fold, emboss, cut and count facial
tissue papers, soft drawing nylon pack facial tissue paper,
box-drawing facial tissue papers, pop up tissue paper napkin,
interleaved tissue paper, interfolded paper towel, V fold hand
towels, nonwoven airlaid tissue, and MG paper napkins etc.
all-in-one machine It adopts vacuum folding style. The mainly
function of this machine is to manufacture commercial tissue paper
products and away-from-home tissue paper products, easy-to-take one
by one plain, embossed and LOGO printed and laminated interfolded
dispenser napkins and V fold hand paper towels. It has 10 lanes
output and can run at very high speed up to 1000 sheets per minute
per lane. The jumbo roll width can be up to 2100mm. It has 4
unwinder jumbo roll stands which are driven by separate independent
reduction motor, not chain and belt. It is an ideal equipment to
manufacture high grade away-from-home customized embossed facial
tissue paper napkin products.
Advantage:
1 Machine for facial tissue and v fold paper towel
2 With both full embossing and edge embossing.
3 high speed up to 1000 sheet/min/lane
4 Energy-saving.
5 Vacuum fold
6 Use vacuum pump
Quick details:
1 Cylinder cutoff size: 200mm/230mm/190mm etc.
2 Steel to rubber Embossed
3 10 lanes
4 Interfolded and V fold
5 Facial tissues packed with soft nylon bags and carton box.
Technical parameters as below
| Model | ACE-V200-10L |
| Output type | High Speed 6lanes Facial Tissue Machine With Steel To Rubber Embossing |
| Folding speed | 1000 piece/min/lane * 10lanes, depending on the paper quality and napkin size. |
| Raw paper | 13-20g/m2 2-ply, 16-45g/m2 1-ply, wooden pulp paper or MG paper or nonwoven airlaid. Other sizes please specify. |
| Jumbo roll size | ≤ 2100mm x Φ1200mm (Depends on your napkin size, customized) |
| Napkin size | Open size: 200±2mm x 200/165/140mm Other size, please specify. Folded size: 100±2mm x 200/165/140mm Fixed cutoff size is 200m. Other size available, please specify. or Customized. |
| Folding type | Inter folding Vacuum fold 1/2 V fold. |
| Embossing unit | 1- Steel to rubber. (Steel to steel is available.) 2- Embossing pattern can be any LOGO, brand name, flowers etc. 3- Embossing pattern can be customized by client or recommended by us 4- Controlled by screws, mechanical pressing type. Cylinder type is optional. |
| Printing unit | Optional 1- Flexo printing type. 2- Printing colors customized up to 4 colors. 3- Printing Logo is changeable. You just need to change the Printing Rubber only. 4- Anilox printing roll. Ceramic anilox roller. 5- Printing roll is adjustable. 6- Ink printing system to be negotiated. 7- With doctor blades. 8- Closed chamber ink circulating system. |
| Point to point Lamination system | Lamination system is optional. a. With 2 complete sets of point to point lamination units. b. The whole design is copied Italy design. c. Heavy chrome coating roll d. Micro-adjustment of nips between the steel roll e. Anilox roll for glue applicant. f. Controlled by cylinders g. Each lamination unit controlled by an independent reducer. When the machine stops, the motor will start running to rotate the anilox roll to prevent it getting dry. |
| Tension control | Speedless Tension control unit to fit the machine for paper of different quaity and different gsm. With automatic web guiding system. With automatic web tension control system. |
| Calendar unit | Make the napkin softer. |
| Counting | Automatic counting unit |
| Emergent stop | Emergent stop unit to inspect any paper breaks, paper jams. |
| Paper feeding | Synchronizer for feeding paper |
| Power | 7.5Kw for main motor 18.5KW for vacuum pump (3-phase AC380V 50Hz or customized) |
| Machine size | 6x2x2m |
| Weight | 6T |
| Videos and photos available. | |
D. Folding unit
a. Automatic left-right stagger counting unit
b. Independent Floor standing wallboard structure (thickened full steel plate support structure), to make sure the machine will NOT vibrate when running at high speed. Other companies adopt half steel frame for upper part and half steel part for lower parts, which is weak structure.
c. Add oil in manual
d. With stepless-adjustment hand wheels to control web tension.
e. With slitters.
E. Full Embossing unit (New technology copied Italy)
a. With NEW Technology steel-to-rubber full embossing unit. (Embossing pattern provided by the buyer or recommended by us.)
b. Controlled by level-type pneumatic system copied Italy design. Most other companies’ machines embossing units are controlled by screws or direct-pressing cylinders which make it very difficult to control the web tension and the paper will stick to the rollers, if you are not experienced enough, it will be big problem for you. They mostly put the embossing units on the steel frame, when the machine is running at high speed; it will definitely vibrate very much.
c. Embossing tension is adjustable.(Micro adjustment.) so that the machine can work with papers with different quality and different gsm.
d. Floor standing wallboard structure (thickened full steel plate support structure); to make sure the machine will NOT vibrate when running at high speed. Other companies adopt half steel frame for upper part and half steel part for lower parts, which is weak structure.
Finished products by this High Speed 6lanes Facial Tissue Machine With Steel To Rubber
Embossing:
