|
[China]
Trade Verify
Address: Building 7, No.2318, East Taihu lake road,, Wuzhong District, Suzhou, China
Contact name:Andy
Suzhou Hongjinli Gas Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
freeze dryer
Our refrigeration dryer is with compact structure and small size which can save installation space. There are a lot of advantages, such as good heat exchange efficiency, low pressure loss, high utilization rate of compressed air, energy saving and environmental protection. The refrigeration dryer adopts heat exchanger with aluminum alloy steel plate which combines the pre-cooling regenerator, evaporator, gas water separator into one integrated design, and it saves more than 20% energy than the traditional tube-fin heat exchanger under the same flow resistance and pump power consumption, so it can reach the dew point pressure of 2-10℃ with less energy consumption.
| refrigerated dryer (air-cooled type) Technical parameters | ||||||
| Model | Air treatment(m³/min) | Compressor power (HP) | Power supply(V/50Hz) | Air pipe diameter | Dimensions(length x width x height mm) | Weight(Kg) |
| BL0005 | 0.8 | 0.25 | 220 | DN20(G3¾4") | 400X800X640 | 50 |
| BL0010 | 1.8 | 0.35 | 220 | DN20(G¾4") | 400X800X640 | 55 |
| BL0020 | 2.8 | 0.5 | 220 | DN25(G1") | 400X800X780 | 65 |
| BL0030 | 3.8 | 0.75 | 220 | DN25(G1") | 400X800X780 | 68 |
| BL0040 | 5.5 | 1.25 | 220 | DN40(G1½*) | 500X860X880 | 90 |
| BL0060 | 6.8 | 1.5 | 220 | DN40(G1½*) | 500X860X880 | 95 |
| BL0080 | 8.8 | 2 | 220 | DN50(G2") | 700X900X1000 | 130 |
| BL0100 | 11.5 | 2.5 | 220 | DN50(G2") | 700X900X1000 | 135 |
| BL0120 | 14 | 3 | 380 | DN65(G2½") | 700X1000X1000 | 160 |
| BL0150 | 16 | 380 | 4 | DN65(G2½*) | 800X1000X1000 | 165 |
| BL0200 | 22.8 | 5 | 380 | DN80(F3) | 700X1450X1160 | 250 |
| BL0250 | 28.5 | 6 | 380 | DN80(F3) | 700X1450X1160 | 300 |
| BL0300 | 35 | 8 | 380 | DN80(F3) | 1800X1000X1360 | 400 |
| BL0400 | 45 | 10 | 380 | DN100(F4) | 2000X1000X1360 | 500 |
| BL0500 | 55 | 12.5 | 380 | DN100(F4) | 2200X1100X1480 | 600 |
| refrigerated dryer (water-cooled type) Technical parameters | |||||||
| Model | Air treatment(m³/min) | Compressor power (HP) | Power supply(V/50Hz) | Cooling water volume(m²/h) | Air pipe diameter | Dimensions(length x width x height mm) | Weight(Kg) |
| BL0120W | 14 | 3 | 380 | 2.8 | DN65(G2½") | 700X1000X1000 | 160 |
| BL0150W | 16 | 4 | 380 | 3 | DN65(G2½") | 800X1000X1000 | 165 |
| BL0200W | 22.8 | 5 | 380 | 3.5 | DN80(F3) | 700X1450X1160 | 250 |
| BL0250W | 28.5 | 6 | 380 | 4 | DN80(F3) | 700X1450X1160 | 300 |
| BL0300W | 35 | 8 | 380 | 5 | DN80(F3) | 1800X1000X1360 | 400 |
| BL0400W | 45 | 10 | 380 | 7 | DN100(F4) | 2000X1000X1360 | 500 |
| BL0500W | 55 | 12.5 | 380 | 9 | DN100(F4) | 2200X1100X1480 | 600 |
| BL0600W | 65 | 15 | 380 | 10 | DN125(F5) | 2200X1100X1480 | 700 |
| BL0800W | 85 | 20 | 380 | 12 | DN150(F6) | 2300X1300X1880 | 900 |
| BL1000W | 105 | 25 | 380 | 14 | DN150(F6) | 2400X1300X2100 | 1100 |
| BL1200W | 120 | 30 | 380 | 16 | DN200(F8) | 2600X1800X2500 | 1500 |
| BL1600W | 160 | 40 | 380 | 18 | DN200(F8) | 2800X2000X2600 | 1650 |
| BL2000W | 200 | 50 | 380 | 24 | DN250(F10) | 3400X2100X2700 | 2000 |
| BL2500W | 250 | 60 | 380 | 24 | DN250(F10) | 3800X2100X2800 | 2600 |
| BL3000W | 300 | 70 | 380 | 35 | DN300(F12) | 4000X2100X2900 | 3500 |
| BL3600W | 360 | 80 | 380 | 40 | DN300(F12) | 4200X2100X3000 | 4500 |
| Standard working conditions | ||||
| air inlet temperature | ambient temperature | work pressure | pressure dew point | refrigerant |
| 38℃ | 35℃ | 0.7MPa | 2-10℃ | R-22 |
| Working range | ||
| work pressure | ambient temperature | Maximum intake air temperature |
| 0.6~1.3MPa | 5~45℃ | <80℃ |
