380V, 50/60 Hz
Modular design, easy assembly
Enclosure: Max. IP40
CCC,ISO9001,GB7251,IEC439
Send us your SLD (Single Line Drawing) or requirements, we design
the switchgear plan for you
General
Used for power users such as power plants, substations, factories
and mines, as AC 50-60Hz, rated working current up to 3150A in the
power distribution system, as the power conversion, distribution
and control of power, lighting and power distribution equipment.
The product has the characteristics of good dynamic and thermal
stability, novel and reasonable structure, practical electrical
scheme, strong serial usability, and high protection level. It can
be used as an updated product.
Working environment
1. The ambient temperature is not higher than +40℃ and not lower
than -5℃.
2. When the product is installed and used, the altitude of the
place of use should not exceed 2000M.
3. The relative humidity of the surrounding air is not more than
90% (+25℃).
4. The equipment should be installed in a place without severe
vibration and impact, and in a place where the electrical
components are not corroded.
5. The relative humidity of the surrounding air does not exceed 5%
when the maximum temperature is 40 degrees, and a larger relative
temperature is allowed at a lower temperature, which should be
considered due to
Temperature changes may occasionally produce condensation effects
6. The equipment is installed in a place where there is no severe
vibration and impact, and where the electrical components are not
corroded
7. When the user has special requirements, it can be resolved
through consultation with the manufacturer
Features
1. The floor of the GGD AC low-voltage power distribution cabinet
adopts the general floor form, and the frame is assembled by
welding with 8MF cold-formed steel. The frame parts and special
supporting parts are supplied by the designated steel manufacturer
to ensure the floor of the cabinet. Precision and quality. The
parts and components of the general cabinet are designed according
to the principle of the module, and are equipped with 20-module
mounting holes, which have a high universal coefficient. Can make
the factory realize pre-production. This not only shortens the
production cycle, but also improves work efficiency.
2. The GGD cabinet is designed with full consideration of the heat
dissipation problem when the cabinet is running. There are
different numbers of cooling slots on the upper and lower ends of
the cabinet
When the electrical components in the cabinet heat up, the heat
rises and is discharged through the upper slot, while the cold air
is constantly replenished into the cabinet from the lower slot, so
that the sealed cabinet forms a natural ventilation channel from
bottom to top to reach the heat dissipation area. purpose.
3. According to the requirements of modern industrial product
design, adopt the golden ratio method to design the cabinet shape
and the division size of each part, so that the overall appearance
is beautiful and fresh.
4. The door is connected to the frame with a hinged hinge for
installation. Easy to disassemble. There is a mountain-shaped
rubber-plastic strip at the folding edge of the door. When the door
is closed, the embedded strip between the door and the frame has a
certain compression stroke, which can prevent the door from
directly colliding with the cabinet body and improve the protection
level of the door.