|
[China]
Trade Verify
Address: Room 20E, Block 1-A, Oriental Ginza, No. 48 Dongzhimenwai Avenue, Dongcheng,100007, Beijing, China
Contact name:Lisa Niu
Beijing Zetron Technology Co., Ltd |
|
Verified Suppliers
|
|
|
In-situ Laser Process Gas Analyzer
In-situ laser process gas analyzer GasTDL-3100 is a
high-performance laser gas analyzer based on tunable diode laser
absorption spectroscopy technology (TDLAS).
With a cross-stack design, GasTDL-3100 can be used for industrial
process gas control; The response time is fast, which is generally
calculated in seconds in in-situ measurement. It can avoid the time
delay caused by sampling measurement. The gas component
concentration can be reflected online and in real time.
| Measurement Component | O 2 , CO, CO 2 , CH 4 * |
| Measurement Principle | TDLAS |
| Measurement Range | O2: (0~5)%VOL(100% can be customized) CO: (0~100)%VOL CO2: (0~100)%VOL CH4: (0~20)%VOL |
| Precision | ≤±1%F.S. |
| Repeatability | ≤±1%F.S. |
| Drift | ≤±1%F.S. |
| Resolution | 0.01% VOL |
| Response time | T 90 ≤4s |
| Working Parameter | |
| Ex-proof Grade | Exd II CT6 |
| Installation Method | In-situ Installation |
| Working Temperature | (-20~+60)℃ |
| Power Supply | 24V DC, 24W |
| Purge Gas Source | (0.3~ 0.8) Mpa Industrial N2 |
| Interface Signal | |
| Communication | RS485,RS232 |
| Analog signal | 2 channels 4~20mA output 3 relay outputs |
| Metallurgy | Blast furnace ironmaking | Blast furnace gas analysis | CO, CO 2 , O 2 , CH 4 |
| Safety control of blast furnace coal injection | O 2 , CO | ||
| Hot blast stove flue gas analysis | O 2 , CO | ||
| Converter steelmaking | Converter gas recycle | O 2 , CO | |
| Converter gas safety control | About 2 | ||
| Carbon determination of converter flue gas | CO, CO 2 , O 2 | ||
| Coking production | Electric coke catching safety control | CO, O 2 | |
| Analysis of Coke Dry Quenching (CDQ) Circulating Gas | CO, CO 2 , O 2 | ||
| Coke oven gas analysis | H 2 S, NH 3 | ||
| Other | Gas calorific value analysis | CO, CH 4 | |
| Boiler flue gas analysis | CO, O 2 | ||
| Petrochemical | Oil refining | Catalytic Cracking (FCC) regeneration flue gas analysis | CO, CO 2 , O 2 |
| Hydrogen production from alkanes | CO, CO 2 , CH 4 | ||
| Sulfur recovery | About 2 | ||
| Ethylene cracking | Reactor outlet, etc. | CO, CO2 etc | |
| EO / EG | Process gas | O2, C2H4 etc | |
| ON | Process gas | About 2 | |
| PP | Process gas | About 2 | |
| Ethylbenzene/styrene monomer/PS | Process gas | O2, CO/ CO2 trace water in Benzene | |
| PTA | Oxidation reactor control | CO, CO 2 , O 2 | |
| Coal gas | Process gas | About 2 | |
| Methanol/synthetic ammonia/urea | Process gas | O2, CO, CO2, NH3 etc | |
| Carbon ratio of urea to ammonia | NH 3 , CO 2 | ||
| Chlor-alkali/PVC | Trace water in Cl2 | H 2 O | |
| Trace water in EDC | H 2 O | ||
| Synthetic cycle gas | O2, CO2, C2H4 etc | ||
| Oxychlorination process | O2, CO2, C2H4 etc | ||
| VCM tail gas recycle | About 2 | ||
| Hydrogen peroxide | Oxidation process | About 2 | |
| Acid production with Sulfuric | Oxidation process | About 2 | |
| TDI | Water gas | About 2 | |
| Environmental protection | Flue Gas Emission | Analysis of flue gas from waste incineration | HCL, HF, CO, CO2, O2 |
| Flue gas denitration process control | NH3, NO, NO2 | ||
| Combustion process control | O 2 , CO, CO 2 | ||
| Cement | Cement Production | Control of the combustion process at the inlet and outlet of the rotary kiln | O 2 , CO, CO 2 |
| Coal injection (mill, pulverized coal silo) safety monitoring | O 2 , CO | ||
| Combustion control of preheater and cyclone heater | O 2 , CO, CO 2 | ||
| Electricity | Thermal power generation | Combustion control | O 2 , CO |
| Coal injection (mill, pulverized coal silo) safety monitoring | O 2 , CO |
Q: When do you reply to messages?
A: We will reply you for your inquiry in 24 hours.
Q: When do you send the products? And how do you send it ?
A: For the small order, we will send out the goods with 5 days,If
have stock ,we will send immediately.
We send them by ups, fedex, tnt or dhl. For big order, normal is 20
days will finish.
Q:Do you accept OEM or revised logo, color, model,size?
A:Yes, we accept OEM for the qualify buyer. We can make the
products according to customer personal requirement.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products
will be fully pre-inspection by QC departments before ,shipping to
you . We have the certification of ISO,CE we could send the
certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you , until you
get the products.
When you got the goods, test them, and give me a feedback.
If you have any questions about the problem, contact with us, we
will offer the solve way for you.
