|
[China]
Trade Verify
Address: Room 20E, Block 1-A, Oriental Ginza, No. 48 Dongzhimenwai Avenue, Dongcheng,100007, Beijing, China
Contact name:Lisa Niu
Beijing Zetron Technology Co., Ltd |
|
Verified Suppliers
|
|
|
MS104K-S Portable Gas Detector
MS104K-S is a compact, ultra-low power consumption, mobile gas
detector for rapid detection of gas concentration. It can detect
1~4 kinds of gas at the same time at most. It has the function of
large-capacity data storage. MS104K-S portable gas detector adopts
a high-counting array display to display the concentration in
real-time and record storage.
Protection level P65, up to IP68 needs special treatment,
waterproof splash, dustproof, explosion-proof, shockproof,
intrinsically safe circuit design, anti-static,
anti-electromagnetic interference.
●Waterproof, dustproof, explosion-proof, shockproof, intrinsically safe circuit design, anti-static, anti-electromagnetic interference,
Passed the national standard test and CMC measurement instrument production license certification
●Protection level IP65
●2.31-inch high-definition color screen displays real-time concentration, alarm, time, temperature, humidity, storage, communication, power,
Charge status and other information, the menu interface uses high-definition simulation icons to display the function names of each menu
●Large-capacity data storage function, supporting 100,000 data storage capacity. Support real-time
Storage, timing storage, or only alarm concentration data and time, support local viewing and deleting data,
The data can also be uploaded to the computer through the USB interface, and the data can be analyzed, stored, and printed with the host computer software.
●USB charging port, overcharge, over-discharge, overvoltage, short circuit, overheat protection, 5-level accurate power display
●Using 2100mAH rechargeable polymer battery can work continuously for a long time
●Sound and light alarm, vibration alarm, visual alarm, under-voltage alarm, fault alarm, shutdown alarm.
●The alarm value can be set, and the alarm mode can be selected as low alarm, high alarm, and interval alarm
●It can be selected to detect 1～4 kinds of gases at the same time, and the unit can be switched freely
Optional units: PPM, mg/m3, Vol%, LEL%, PPHM, ppb, mg/L
●Three display modes can be switched: display the concentration of four gases at the same time, the concentration of the single-channel gas and the real-time curve are displayed in large fonts, each channel
The detector is widely used in petroleum, chemical
industry,environmental protection, metallurgy, refining, gas,
biochemical medicine, agriculture, fire protection, Archaeology and
other industries and places that need safety monitoring for
toxicity and harmfulness, explosion prevention.
| Detection gas | Complex gas (carbon monoxide CO, hydrogen sulfide H2S, oxygen O2,
flammable gas EX) or any other single gas, except individual sensors with high power consumption |
| Detection range | CO (0 ~ 1000ppm), H2S (0 ~ 100ppm), O2 (0 ~ 30%VOL), Ex (0 ~ 100%LEL),Other range can be customized |
| Display mode | HD LCD dot matrix display, double button operation |
| Detection accuracy | ≤±3% (F.S) |
| Response time | T90≤30s |
| Data storage | Standard 20,000 pieces of data capacity, Support the local view, delete or data export, storage time interval arbitrary Settings |
| Communication interface | Infrared communication, Optional Bluetooth, LORA communication, etc |
| Explosion-proof mark | Exia II CT4 Ga |
| Protection grade | IP65, Dustproof, Waterproof splash |
| Dimensions | 77×68×35mm(L×W×H) |
| Weight | Less than 150g |
