Rubber Mud Pump Seal Parts 9.125″× 10.375″× 0.625″ HH11309.03.011.094 Haihua F1600

Haihua F1600 mud pump seal 9.125″× 10.375″× 0.625″ HH11309.03.011.094 mud pumps for drilling rigs

Haihua F1600 mud pump seal 9.125″× 10.375″× 0.625″ HH11309.03.011.094

The oil seal is generally divided into single type and assembly type. The assembly type is that the framework and lip material can be freely combined, which is generally used for special Double Lip Oil Seal .

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.

The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring. Dynamic examples include rotating pump shafts and hydraulic cylinder pistons. Static applications of O-rings may include fluid or gas sealing applications in which: (1) the O-ring is compressed resulting in zero clearance, (2) the O-ring material is vulcanized solid such that it is impermeable to the fluid or gas, and (3) the O-ring material is resistant to degradation by the fluid or gas.

O-rings are one of the most common seals used in machine design because they are inexpensive, easy to make, reliable and have simple mounting requirements. They have been tested to seal up to 5000 psi (35 megapascals) of pressure. The maximum recommended pressure of an O-ring seal depends on the seal hardness and gland clearance.

According to the sealing function, characteristics, structure type, working state and sealing mechanism of Double Lip Oil Seal , it can be divided into various forms and different names, but it is customary to call the lip seal ring of rotating shaft as oil seal, and the seal used for static seal and dynamic seal (general reciprocating motion) as seal.

The representative form of oil seal is TC Double Lip Oil Seal , which is a double lip oil seal with self tightening spring completely covered by rubber. Generally speaking, the oil seal usually refers to the TC framework oil seal.

Mud Pump Parts Model We Can Do

FAQ
1) How can I place order?
A: You can contact us by email about your order details, or place order on line.

2) How can I pay you? 
A: After you confirm our PI, we will request you to pay. T/T is the most usual ways we are using.

3) What's the order procedure?
A: First we discuss order details, production details. Then we issue you an PI for your confirmation. You will be requested to do pr-e paid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25 days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.

4) How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.

5) How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into next step production procedure.

More customer view: 2-TSC WF2200 PUMP-yindapump.com.pdf