Home Companies Shenzhen zk electric technology limited company

7.5KW 10 Hp Variable Frequency Drive

Shenzhen zk electric technology limited  company

Contact Us

[China] country

Trade Verify

Address: Room 727, Guanlida Building, NO. 269 of Qianjin Road, Wenhui community, Xin'an street

Contact name:Huang

Inquir Now

Shenzhen zk electric technology limited company

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

7.5KW 10 Hp Variable Frequency Drive

Country/Region china
Categories Electrical Ceramics
InquireNow

Product Details

VFD Top Manufacturer Single Phase 3phase 7.5KW 10HP Frequency Converter

 

ZK S100 series frequency Converter mainly features:

 

  • S100 is a high reliability and high software performance motor drive with rich and perfect software&hardware functions to meet the application needs of most industrial sites;
  • S100 can drive asynchronous motor and permanent magnet synchronous motor(PMSM) simultaneously. It could run with vector control without PG card, vector control with PG card, speed/torque control and position servo control.
  • Adopt advanced software vector control algorithm, which can provide high performance open loop vector control for asynchronous motor and synchronous motor. Meanwhile, simple vector control of asynchronous motor and synchronous motor can be used to meet the requirements of general speed adjustment application.
  • Built-in PID controller, the improved PID function can satisfy most of the on-site process control, such as the closed-loop control of temperature, pressure and flow.
  • Multiple protection function to ensure the safety of the drive and motor.
  • Standard 485 communication interface, support Modbus/RTU communication protocol, direct and upper computer communication for field bus control; Profibus-DP and CAN function also optional.

 

Technical specifications:

 

ItemsSpecification
Control modeControl modeV/F controlSensorless in open loopClose loop vector control
 Starting torque0.5Hz 150%0.5Hz 180%0.00Hz 180%
 Speed adjust range0: 501:1001:1000
 

Speed stabilizing

precision

±1%±0.1%±0.02%
 Torque precisionNONO±5%
 Motor type

General induction motor

permanent magnet synchronous motor (PMSM )

Function designHighest frequency

General vector control :320Hz

V/f control: 3200Hz

 frequency resolution

Digital setting: 0.01Hz

Analog setting:maximum×0.025%

 Carrier frequency0.5K~16KHz, the carrier frequency can be adjusted by temperature automatically
 Frequency reference setting methodDigital of Control panel, analog AI1, AI2, potentiometer of control panel, UP/DN control, communication, PLC pulse frequency
 Acceleration./deceleration characteristicLinear curve and S curve accel. /decel. mode, range of time: 0.0 to 65000S.
 V/F curve3 mode: linear, multiple points, N Power
 V/F separation2 times separation: totally separation, half separation
 DC braking

DC braking frequency: 0.0 to 300Hz,

DC braking current: 0.0% to 100%

 Braking unitStandard built in for up to 4T22G (22kw), optional built it for 4T30G~4T110G (30kw to 110kw), external built for above 4T160kw .
 Jog functionJob frequency range: 0.0 to 50.0Hz, the acceleration and deceleration time of Jog
 Configured PID functionEasy to perform pressure, flow, temperature close loop control.
 PLC multiple speedTo achieve 16 segment speed running through built in PLC or terminal control
 Common Dc busMultiple drives use one DC bus for energy balance.
 Auto voltage regulation (AVR)Enable to keep output voltage constant when grid fluctuation
 Over load tolerance capability

G type model: 150% rated current for 60s, 180% rated current for 3s,

P type Model: 120% rated current for 60s, 150% rated current for 3s.

 Stall protection control when over current, over voltageCarry out limiting automation for running current, voltage to prevent over current, over voltage frequently
 Rapid current limit functionMinimize the IGBT module broken to protect the AC Drive, maximum reduce the over current fault.
 Torque limit and torque control

"Excavator" characteristics , torque limit automatically during motor running. Torque control is available in close loop vector control mode.

 

 

FeaturesFriendly interfaceDisplay “Hello” when power on.
 Multiple function key JOG buttonIt can set for Forward Jog, reverse Jog, forward/reverse switch
 Timing control functionA total running time and total running time calculating
 2 group motor parametersTo achieve two motor switchover freely, control mode is selectable
 Motor over heat protectionAccepting motor temperature sensor signal input via AI1 terminals.
 Multiple kinds encoder *Compatible collector PG, differential PG, and rotary transformer Encoder( resolver).
 Command sourceControl panel, control terminals, series communication, switch freely.
 Frequency sourceDigital setting, analog current/voltage, pulse setting, serial communication, main and auxiliary combination.
 Protection functionShort circuit detect when power on, input/output phase loss, over voltage, over current, under voltage, over heat, over load protection.
EnvironmentApplication siteIndoor, free of exposure to sunlight, no dusty, no corrosive, no inflammable gas, no oil and water vapor, and water dipping
 AltitudeLower 1000m
 Environment temperature-10℃~+40℃, power derated for 40~50℃, rated current derated 1% for 1℃ increasing.
 humidityLess than 95%, no water condense.
 storage-40~+70℃
 IP degreeIP20  (IP54 is avaliable)

 

Input voltage and power range:

 

PowerVoltagePhase
0.75KW~2.2KW220V~240Vsingle phase input & single phase output
0.75KW~7.5KW220V~240Vsingle phase input & 3 phase output
0.75KW~132KW220V~240V3 phase input& 3 phase output
0.75KW~800KW380V/440/480V3 phase input& 3 phase output

 

2.3 S100 VFD model number and related current, voltage

2.3.1 Single phase 220v, 50/60Hz

Model NumberKVAInput current(A)Output current(A)Adaptable motor(KW)
S100-2S-0.4GB13.42.10.4
S100-2S-0.7GB1.553.80.75
S100-2S-1.5GB35.85.11.5
S100-2S-2.2GB410.592.2
 

2.3.2 Three-phase 220v,50/60Hz

Model NumberPower capacity (KVA)Input current(A)Output current(A)Adaptable motor(KW)
S100-2T-0.4GB1.53.42.10.4
S100-2T-0.7GB353.80.75
S100-2T-1.5GB45.85.11.5
S100-2T-2.2GB5.910.592.2
 

2.3.3 Three-phase 380v±15%, 50/60Hz

Model NumberPower capacity (KVA)Input current(A)Output current(A)Adaptable motor(KW)
S100-4T-0.7GB1.53.42.10.75
S100-4T-1.5GB353.81.5
S100-4T-2.2GB45.85.12.2
S100-4T-4.0G/5.5PB5.910.593.7
S100-4T-5.5G/7.5PB8.914.6135.5
S100T-4T-7.5G/11PB1120.5177.5
S100-4T-11G/15PB17262511
S100-4T-15G/18.5PB21353215
S100-4T-18.5G/22PB2438.53718.5
S100-4T-22G/30PB3046.54522
S100-4T-30G/37P40626030
S100-4T-37G/45P57767537
S100-4T-45G/55P69929145
S100-4T-55G/75P8511311255
S100-4T-75G/90P11015315075
S100-4T-90G/110P13018218090
S100-4T-110G/132P160214210110
S100-4T-132G/160P192232253132
S100-4T-1**G/**P********
 

 

Hot Products

Three Phase 380V Mppt Solar Water Pump Converter DC to AC Solar Pumping Inverter 30KW Simple ...
380V Three Phase 0.75KW To 400KW VFD/Variable Frequency inverter/VSD for Motor The S100-series ...
S100 motor VFD variable speed drive frequency inverter for motor speed controll S100 series is a ...
22kw 30kw 37kw 380v 440v VSD VFD frequency inverter S100 related current and voltage Single phase ...
AC To AC 220V Single Phase To Three Phase 1.5kw 2.2kw VFD Variable Frequency Converter ZUN/ZK S100...
VFD Top Manufacturer Single Phase 3phase 7.5KW 10HP Frequency Converter ZK S100 series frequency ...