Auto Double Sides Motor Stator Coil Winding Machine ISO / SGS Audit
This coil lacer is mainly used to do stator end coil lacing. It has
only one needle, therefore, it can only lace single side each time.
This stator winding lacing machine is suitable for stator coil to
do automatic lacing.Each machine is PLC controlled with an inverter
drive and can be fully programmed to suit different stator slot
configurations. The lacing type, like slot by slot lacing, intercal
lacing, and fancy lacing could be achieved by setting in
human-machine interface. The wokring process, such as single-needle
and single-side automatic lacing; needle transpositioning, hooking,
are all controlled by servo system. Stator is loaded on this coil
lacing machine vertically.
Applications:
This machine is suitable for stator used in induction motor
industry. This lacing manchine is especially applied to multi
sizes, low output or more lead stator winding lacing.
Machine speicification:Stator ID | φ35-φ120 |
Statro OD | less than 190mm |
Stator lamination height | 40-160mm |
Max winding height | 60MM |
Lacing speed | 0.8S/slot |
Lacing mode | slot by lsot/interval slot/fancy lacing |
Power | 3800V 50-60HZ |
Air pressure | >0.4mpa |
Weight | 450KG |
Dimension | 1000x600x1300 |
Competitive advantages
We have Overseas Service Center.
Variety of application, easy operation.
We could customize machine for our customer as per their
requirement.
The operation and tooling change process is easy.
Machine is controlled by PLC. All the parameter can be set in the
touch screen.
It is suitable for stators with different model number and
dimension.
This machine is controlled by PLC. All the parameter could be set
on the touch screen,
We directly supply our machines to many countries, like USA,
France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.