|
[China]
Trade Verify
Address: No.188 Gaoxin Road,Weibin District Baoji City,Shaanxi,China
Contact name:Nicole
Shaanxi Peakrise Metal Co.,Ltd |
|
Verified Suppliers
|
|
|
Tungsten Copper Spot Welding Electrode
1. The Tungsten Copper Spot Welding Electrode's description:
The tungsten copper alloy is ideal for welding electrodes because it is simple to process, has excellent temperature resistance, arc ablation resistance, a high specific gravity, and good electrical and thermal conductivity.And Tungsten copper spot welding electrode is one of the most critical parts to ensure spot welding quality. Its main functions include directing the current of the spot welder to the workpiece, transferring pressure, and rapidly dissipating heat from the weld zone.
2. Different performance table for different copper content of Tungsten Copper Spot Welding Electrode:
Cu content | Other impurities | W content | Density g/cm3 | Resistance | Conductivity (%IACS) | Hardness (HB) | Flexural strength (Mpa) |
| 50±2 | 0.5 | Remain | 11.85 | 3.2 | 54 | 1128 | / |
| 45±2 | 0.5 | Remain | 12.30 | 3.5 | 49 | 1226 | / |
| 40±2 | 0.5 | Remain | 12.75 | 3.7 | 47 | 1373 | / |
| 35±2 | 0.5 | Remain | 13.30 | 3.9 | 44 | 1520 | / |
| 30±2 | 0.5 | Remain | 13.80 | 4.1 | 42 | 1716 | 790 |
| 25±2 | 0.5 | Remain | 14.50 | 4.5 | 38 | 1912 | 885 |
| 20±2 | 0.5 | Remain | 15.15 | 5.0 | 34 | 2158 | 980 |
| 15±2 | 0.5 | Remain | 15.90 | 5.7 | 30 | 2354 | 1080 |
| 10±2 | 0.5 | Remain | 16.75 | 6.5 | 27 | 2550 | 11 |
3. Advantage of Tungsten Copper Spot Welding Electrode:
1. High machining accuracy and small contact area of the tip of the
welding tip;
2. The required voltage is low, the welding efficiency is high, and
the welding stability is good;
3. It has high enough torsional strength to effectively ensure the
quality and precision of processing;
4. The welding quality is high, the welding seam is small, the
consistency is good, and the virtual welding is not easy to occur.
4.Common method of Tungsten Copper Spot Welding Electrode:
(1). Special conditions are adopted to increase the influence of
heat generation by contact resistance between workpieces and reduce
the influence of heat dissipation of electrodes. Capacitor energy
storage welding machine can weld workpieces with relatively large
thickness by using high current and short power-on time;
(2). Use electrodes with different contact surface diameters to use
smaller diameters on the side of thin parts or workpieces with good
electrical and thermal conductivity to boost this side's current
density and lessen electrode heat dissipation's impact;
(3). Use different electrode material sheets or copper alloys with
poor thermal conductivity on one side of the workpiece with good
electrical and thermal conductivity to reduce heat loss on this
side;
(4). Use a process gasket to pad a gasket made of metal with poor
thermal conductivity (thickness is 0.2-0.3mm) on the side of the
thin piece or the workpiece with good electrical and thermal
conductivity to reduce heat dissipation on this side.
