Guangdong Mytop Lab Equipment Co., Ltd |
|
1. Product
Economic Scratch Resistance University Laboratory Bench For Chemical Lab
2. C frame:
1. Material for upright frame: It's made of 60X40X1.5mm steel pipe
by welding, it's with epoxy resin powder after acid-washing and
phosphorization.
2. Connection wing: solid plastic parts or welded steel part on
C-frame itself, it depends on customer's requirement.
3. Adjustable feet: Using M10 screws(treated by galvanization) with
adjustable height not less than 10mm to make cabinets
moisture-resistant and height adjustable.
3. Worktop:
16mm phenolic resin worktop or 16 mm epoxy resin worktop which are
resistant for chemicals and high temperature. The worktops can be
washed easily. The worktop can bear the weight about 200-300kg. The
gap height between worktops≤2mm.
4. cabinet:
1. Door: The material is E1 standard 18mm chipboard, MDF with
melamine or plywood with 2mm PVC water proof edgings.
2. Side panel and layer panel: The material is E1 standard 18mm
chipboard, MDF with melamine or plywood with 2mm PVC water proof
edgings.
3. Back panel: E1 standard 18mm chipboard, MDF with melamine or
plywood with 2mm PVC water proof edgings. The back panel can be
dissembled and it's convenient for installation and maintain of
pipe and electricity cable.
4. Drawer: The material is E1 standard 18mm chipboard, MDF with
melamine or plywood with PVC water proof edgings.
5. Drawer sliding rail: Using steel 3-joints weight bearing sliding
rail without noise on both sides of drawer.
6. Handle: Using stainless U-type specialized handle in lab or long
aluminu alloy grab handle.
7. Hinge: 304 stainless stee hydraulic hinge which is rust
resistance.