1. Product
Easy Clean Steel Hospital Lab Furniture Lab Center Workbench For
HIV Laboratory
2. Application
Hospital Laboratory such as clinic laboratory, PCR
laboratory, HIV laboratory , biosafety laboratory
3. Technical Data
A. Worktop: The worktop is based on the requirement of customers such as
phenolic resin board, epoxy resin board or ceramic board. The edge
of worktop will be treated specially to ensure its safety for human
body.
B. Structure: Steel structure, full cabinet design, the material for cabinet is
1.0mm BAOGANG cold rolled sheet. The processing procedures includes
cutting, grooving, bending, shaping, assembling and polishing. The
products are produced by precise CNC machine. All the welding
points have been polished specially which will not hurt the hand.
The inside cabinet is with front and back upright columns and
reinforcing ribs to increase the bearing capacity and impact
resistance capacity.
C. Cabinet: The cabinet is made of high quality cold rolled sheet with
different thickness as per its different loading weight. The
surface is treated by acid washing, phosphorization before coating
by epoxy resin powder. The cabinets can be opened with all blank
space without middle support. The inside cabinet is equipped with
adjustable setting for mobile layer.
D. C-Frame: It's made of 60x40x1.5mm steel pipe coated with epoxy resin
powder.
E. Surface panel for door and drawer: The door is with double layer made of 1.0 BAOGANG cold rolled
sheet. We can fill the sound insulation material into the inside
space between two layers if it's required by customer. The drawer
is shaped once made of bending cold rolled sheets. It's with
excellent bearing capacity for the support of drawer. The sealed
panel after bending connects with the outside drawer surface by
self-drilling screws. It can prevent the crashing when closing the
drawer and noise caused by abrasing the coated layer.
F. Bottom panel for cabinet body: The bottom panel is formed once with reinforcing ribs to increase
its bearing capacity and prevent the deforming of steel layers.
G. Handle: Stainless steel U-type handle or long handle shaped once made of
steel.
H. Movable back panel: Movable and free dissembling structure which is convenient for
checking water, electricity and gas pipe etc.
I. Movable layer: It's with reinforcing rib inside to increase its bearing capacity
to avoid deforming. It can be dissembled freely and the height can
be adjusted.
J. Hinge: Using durable DTC 90 degree or 304 stainless steel hinge which can
be used for long time.
K. Drawer sliding rail: Using 3-joints bearing drawer rail with noise reduction, it can
ensure the full opening for the drawer with good bearing capacity
and without deforming.
L. Shelf: The shelf is made of steel frame and steel hanging pieces. The
layer is made of toughened glass which is suitable to put all kinds
of chemicals on it.
4. Worktop Options
| Worktops Compare | Epoxy Resin | Phenolic Resin | Stainless Steel | Edge Grain marble | High Pressure Laminate |
| chemical resistance | excellent | excellent | good | fair | fair |
| abrasion resistance | good | good | good | fair | good |
| heat resistance | excellent | good | good | fair | fair |
| impact resistance | good | good | excellent | good | good |
| areas of use | all | all | select | select | select |
| cost | medium | medium | high | medium | low |
| moisture resistance | excellent | excellent | excellent | fair | fair |
| bacterlal resistance | excellent | excellent | excellent | poor | fair |
