Active Member
|
[China]
Address: 6# Industrial Road, Zhangqi Industrial Park,Cixi,Ningbo,Zhejiang,China 315313
Contact name:
Ningbo Tuxin Communication Equipment Co., Ltd. |
|
|
TUXIN server rack manufacturers 19 Inch server rack with Toughened Glass Front Door
Features:
1. Comply with
ANSI/EIA;RS-310-D;IEC297-2;DIN41491:PART1;DIN41494:PART7;GB/T3047.2-92
standard;compatible with 19’’ international standard, metric system
and EISI standard.
2. The overall use of the frame structure,easy to install.
3. Front door with perforated,back door steel plate.
4. Using the upper and lower line way,can be closed up
and down the alignment channel.large hole size in
bottom can be adjusted.
5. Can easily remove the left and right side doors and
front/rear doors.
6. Install high-speed silent cooling fan at the top of the
cabinet.
7. The bottom of the installation of the steeling wheel
to facilitate the movement, through the foot so that
the overall balance.
8. Front door with elastic lock,solid and cabinet
connection.
Surface finish:
Degreasing, pickling, phosphating, powder coating.
Material and Thickness:
Mounting profile:2.0mm
Others:1.2mm
Color:
RAL9004(black)
RAL7044(gray)
| Brand: | TUXIN | Column spacing: | 465mm (19 inch) |
| No: | TX-PB-6627 | Material: | SPCC cold rolled steel |
| Size: | 600mm*600mm*27U | Function: | Can install server equipment,the router,patch panel,KVM,UPS,Network device,etc. |
| IOS test: | Pass ISO9001:2008 Qualtiy System | Thickness: | Mounting Profile: 2.0mm,others: 1.2-1.5mm |
| Surface treatment: | Degreasing,pickling,phosphating,power coating,etc. | Configuration: | Cage nuts and M6 screws: 20 sets. |
| Standard: | Comply with ANSI/EIA RS-310-D,IEC297-2,DIN41491;PARTI,DIN41494;PART7,GB/T3047.2-92 standard; compatible with ETSI standard. | Device Installation: | It is recommended to install network equipment/server device within 350 mm depth. |
| Order Codes | Capacity | W*D*H(mm) |
| TX-PB*6615 | 15U | 600*600*800 |
| TX-PB*6620 | 20U | 600*600*1000 |
| TX-PB*6624 | 24U | 600*600*1200 |
| TX-PB*6627 | 27U | 600*600*1400 |
| TX-PB*6632 | 32U | 600*600*1600 |
| TX-PB*6637 | 37U | 600*600*1800 |
| TX-PB*6642 | 42U | 600*600*2000 |
| TX-PB*6647 | 47U | 600*600*2200 |
| TX-PB*6824 | 24U | 600*800*1200 |
| TX-PB*6832 | 32U | 600*800*1600 |
| TX-PB*6837 | 37U | 600*800*1800 |
| TX-PB*6842 | 42U | 600*800*2000 |
| TX-PB*6924 | 24U | 600*900*1200 |
| TX-PB*6932 | 32U | 600*900*1600 |
| TX-PB*6937 | 37U | 600*900*1800 |
| TX-PB*6942 | 42U | 600*900*2000 |
| TX-PB*6024 | 24U | 600*1000*1200 |
| TX-PB*6032 | 32U | 600*1000*1600 |
| TX-PB*6037 | 37U | 600*1000*1800 |
| TX-PB*6042 | 42U | 600*1000*2000 |
| TX-PB*8642 | 42U | 800*600*2000 |
| TX-PB*8842 | 42U | 800*800*2000 |
| TX-PB*8042 | 42U | 800*1000*2000 |
Cabinets can be divided into two basic structures: profile and sheet, depending on the weight of the components, materials, and manufacturing processes.
1 Profiles Cabinet: There are two kinds of steel profiles and aluminum profiles. Steel shaped steel cabinets are made up of special-shaped seamless steel tubes. This cabinet is very good in rigidity and strength and is suitable for heavy equipment. Aluminum profiles made of aluminum alloy profiles have a certain degree of rigidity and strength and are suitable for general or light equipment. This cabinet is light in weight, less in processing volume, and beautiful in appearance and widely used.
2 Thin-plate structure cabinets: The entire panel cabinet, whose side plates are formed by bending a whole steel plate. This type of cabinet has good rigidity and strength and is suitable for heavy or general equipment. However, due to the non-removable side panels, assembly and maintenance are inconvenient. The structure of the curved column column cabinet is similar to that of the profile cabinet, and the column is formed by bending the steel plate. This cabinet has a certain degree of rigidity and strength and is suitable for general equipment.
According to need, the cabinet is also equipped with cabinet accessories. Its main accessories are fixed or retractable rails, locking devices, hinges, cable troughs, cabling racks, and shield comb reeds, etc.
FAQ
1. Q:Are you a factory or trading company?
A: We are a Factory, Distributor and Trading Company.
2. Q:Where is your factory located? How can I visit there?
A: Our factory and office is located in Ningbo, China.
You can fly to Ningbo or Shanghai airport,Warmly welcome to visit
us!
3. Q:Can you do OEM?
A: Sure,we can do OEM products.
4. Q:How can I get some samples?
A: We are honored to offer you samples.
5. Q:How does your factory promise quality control?
A: Quality is priority.We always attach great importance to quality
controlling.Our factory has gained CE,ROHS authentication.
