Hailian Packaging Equipment Co.,Ltd |
Verified Suppliers
|
Hoof Trimming Aluminum Alloy High Quality Hoof Cutting Disc With 4-6 Blades
Product Description:
Hoof disease is one of the four most common diseases in
dairy Cows. As the specific conditions of each farm is dfferent
so the frequency of hoof disease is,which will not only affect
the normal lfe of dairy cows, but also decline the production
performance of cows, Improper handing can even lead cow death,
resuting in greater economic losses. Therefore, it is very
necessary to do "nail beauty" for cows.
This disc is used with an angle grinder to form a small
electric hoof trimming machine. It is mainly used for cow hoof
trimming and can also be used for sheep, horses and donkeys. The
cutter is made of imported alloy material with strong wear
resistance. The aluminum aly disc be oxidized to greatly.
Quick Detail:
Name | Model | Inner Hole Dia | Disc Dia | Weight | Angle Grinder |
4 Blades Disc-I | HL-Q7G | 22.2mm | 120mm | 310g | 125/100 Grinder |
4 Blades Disc-II | HL-Q7G-II | 300g | |||
4 Blades Disc-III | HL-Q7G-III | 100mm | 180g | ||
6 Blades Disc-I | HL-Q7G2 | 120mm | 330g |
The importance of Hoof Trimming
The foot trimming is to cure the cow.Hoof disease is a common disease in cattle farms.The sick cows will not stand straight and the knees will bend to reduce the stress and relieve the pain.In this way,the cow becomes a yak,because the pain will make the cow's appetite weak and reduce the diet.Over time,the cow will become thinner and thinner,the milk production will be less and less,and the whole resistance will decrease.At this time,it is necessary to treat the cow by repairing the hoof,and clean up the parts of the decay and necrosis in time to cure the condition of the cow.
Therefore,it is very important to do "nail beauty" for cow.
Advantage of Hoof Trimming disc
- Pass the national patent certificate, and the product has been
registered in the China Article Numbering Center;
- The cutter head is made of aluminum alloy after more than 10
procedures, and the surface is hard-oxidized, which is light, good
in heat dissipation and high in strength;
- The blade is made of Japanese imported alloy material, the
surface is fully coated, and the wear resistance is increased by
3-5 times;
- Most of the cutter heads on the market have not undergone hard
oxidation treatment, and the service life is not long;
- With brand packaging, factory inspection certificate, instruction
manual, and operation video;
- The brand has been registered with the Trademark Office of the
State Intellectual Property Office;
- Have a professional cutter head design team and production team;
Competitive Advantage:
- Warranty: one year warranty;
- Wide range cows farm equipment: headlock, free stall and hutch;
- Reliable quality and excellent products
- Sample is avaiable
- Lifetime technical service support
Product Picture: