Active Member
|
[China]
Address: Laser valley, Baoan distrinct, Shenzhen, Guangdong, China.
Contact name:Jason Chen
Shenzhen Future Technology Co., Ltd |
|
|
Lightweight 2 Suction Arm SuFume Extractor Portable For Laser Marking Beauty Nail Salon
Features:
1 Replaceable efficient filter
2 Noise canceling design,quieter working place
3 Universal smoking arm,easy to operate
4 Noise canceling design low noise,only the volume of ordinary speech,More quiet workshop, reduce the surrounding complaints.
5 Activated carbon deodorization.
Instructions:
| Power(W) | 80 |
| Dimension(mm) | 340*265*480 |
| Air Flow(m3/h) | 220 |
| Noise(db) | <57 |
| Voltage | 110/220 |
| No-load speed(r/min) | 5800 |
| Wind spped(m/s) | 17 |
| Weight(kg) | 11 |
| Negative pressure(pa) | 1800 |
Advantages:
1. Low cost basis: as low as 1.85 yuan / day (8 hours / day)
2. Independent research and development of hall less brushless DC motor, high efficiency, long life, zero consumables and zero maintenance, support continuous 24-hour use.
3. High negative pressure, high flow, small volume, light weight, easy installation, flexible filter replacement.
4. Long service life, low cost, continuous 24-hour work, can use 40000 hours (i.e. normal use for eight to ten years)
5. Multi layer filtration, rapid purification, filter failure sound and light alarm.
FAQ:
Q: Can smoking pipes be shortened or lengthened at will?
A: It can be shortened or lengthened appropriately; But too long fixation is relatively poor, because there is no support point, easy to sag, it is recommended that the length of bamboo pipe should not exceed 1.5 meters, high temperature resistant pipe and hose should not exceed 2M. (depending on model)
Q: What is the smoking hood made of? Can it withstand high temperature? What are their characteristics?
A: Smoking cover silica gel, acrylic, aluminum alloy a total of three materials; The flexibility of silica gel material can withstand the temperature of about 400 degrees, and the cigarette butts are not bad. And acrylic material light transmittance is good, but not high temperature resistance; Aluminum alloy is light, beautiful, high temperature resistant, high price.
Q: Is it difficult to install the product? Do you need a professional to install it?
A: Small equipment refer to the manual, connected to the power supply can be used. No professional installation is required. Large equipment XL-3000/XL-5000 will be installed by professional personnel on site.
Q: What if it were damaged in transit?
A: We are in full charge of it. You don't need to assume any responsibility.
Q: Under what circumstances can I return it?
A: If the same quality problem has not been solved for more than 4 times, we can return it.
Q: Under what circumstances are returns not allowed?
A: Damaged appearance or packaging, beyond the probation period (usually 3 days) is not allowed to return.
Product part picture:
