|
[China]
Trade Verify
Address: TaiZhong Industrial Building Ai Lian LongGang District, Shenzhen, Guangdong, China
Contact name:Jena
Shenzhen Sacon Telecom Co., Ltd |
|
Verified Suppliers
|
|
|
27dBm 4G Wide Band Mobile Phone Signal Booster LTE800 With ALC AGC 80dB Gain
Description:
This single system is designed for indoor signal coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market,office,building...
27dBm Adjustable Repeater allow small to medium size indoor areas have reliable radio communications for first responders. Automatic gain control allows stable output power even when the handheld is close to the repeater, which protects the donor site from interruption. The unit is housed by a compact and light alumina casting enclosure.
This wide band mobile phone repeater has high power and gain, output power is up to 27dBm, gain is up to 80dB, coverage is up to 3000m2.
It can boost 4G LTE800 signal.
Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This
smart function is easier than DIP Switch, can set up parameters,It
is a simple, safe and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the
donor source signal fluctuates.
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great
cover.
3. Cover about 1000~5000m² without block or obstruct.
4. High linear design, ALC function design, low interference to
BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Expansion and extention of the signal of base station. Optimization of the quality of the signal and source
Specifications:
| Frequency Range | Uplink | Downlink | |||
| 4G LTE800 | 832-862MHz | 791-821MHz | |||
| Max. Gain | 75dB | 80dB | |||
| Max. Output Power | 24dBm | 27dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >20dB | ||||
| Ripple in-band | ≤ 6dB | ||||
| Return loss | ≤ -10dB | ||||
| Noise Figure | ≤ 6dB | ||||
| Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
| Modulation Accuracy | ≤ 12.5% | ||||
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Power Supply | AC100-240V,DC9V/5A | ||||
| Power LED | Power indicator | ||||
| Alarm LED | Red | Autoexcitation or High Power | |||
| Green | Standard | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power SwitchManual Gain Control Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Impedance | 50 ohm | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -10°C~55°C | ||||
| Environment Conditions | IP40 | ||||
| Size | 268mm*58mm*189mm | ||||
| Weight | 4.0Kg | ||||
Instructions:
| Power LED | Green | Normal |
| Off | DC power problem | |
| Smart LED | Green | Adjusting the gain automatically |
| Off | Manual mode: adjusting the gain by “+” / “-” button | |
LCD Display |
LCD display will show the real-time gain, “+” increase gain, “-” decrease gain.
| |
SEL | 1. Quickly Press: select the different systems when you need, (only for Dual band, Tri band, Quad-band or Five band repeater) 2. Press for 2 Seconds: select the smart mode or manual mode | |
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Standard Package:
AC90-264V, DC5V/5A power supply adapter 1PCS
AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
Installation kit 1PCS
User manual 1PCS
