WENGYUAN HENGHUI CHEMICAL COATING CO.,LTD. |
Verified Suppliers
|
Chameleon Acrylic Paint Auto Clear Coat Paint Water Proof Varnish for Auto
Product Description:
Clear coat
-ES series varnishes have excellent application properties and can impart a beautiful appearance to repaired finishes.
-When spraying 1k basecoat, varnishes without softening additives can be used.
-Varnish adds shine to the coating. But over time, its appearance deteriorates. A varnish coat becomes faded and ugly.
-The car varnish not only adds saturation and perfection to the body surface, but also protects it from corrosion and minor damages, prevents premature fading of the paint and prolongs its use.
Physical properties
Product introduction | Two-component clear coat, cost-effective, resistant to various chemical erosion, durable weather resistance and good gloss retention. |
Density | 0.93 kg/L |
Raw materials | Acrylic Resin, Additive, Solvent |
Colors | Transparent |
Solid content | 52%,53%,55%,60% |
Product List
Item No. | Product Name | Mixning ratio: (base paint : hardener : thinner) | volume of package can |
ES7600 | UV Resistance Super Fast Dry Clear Coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES840 | matte clear coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES850 | 4:1 HS UV Resistance Clear Coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES810 | MS Clear Coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES810-1 | MS Clear Coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES830 | MS Clear Coat High Gloss | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES870 | VOC Clear Coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES950 | HS Clear Coat (UV resistant) | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES980 | HS extra Clear Coat (UV resistant) | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES9600 | clear coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES999-1 | HS EXTRA UV resistant clear coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
ES999 | E-HS EXTRA UV resistant clear coat | 1 : 0.5:(0.2-0.3) | 1L,4L,20L |
Note:
- When the temperature is higher than 30℃, the diluent should be added with an appropriate amount of 120 Retarder.
- For the specific addition method, see the instructions for use of 120 Retarder.
Application process:
spray gun | Gravity gun | Suction gun |
gun nozzle: 1.3-1.5mm, gun pressure: 2.0-4.0 MPa | gun nozzle: 1.3-1.5mm, gun pressure: 1.5 - 2.0 Mpa | |
substrate | dry 1K base coat /dry clear coat | |
Paint preparation | clear coat, hardener: denpents on what model no.of thinner: EX10/EX20/EX30 | |
mix ratio | 1 : 0.5:(0.2-0.3) (base paint : hardener : thinner) | |
spraying layers | 2-3 coats | |
flash off time | 5-10 mins , 20-25℃ | |
surface dry time | 20mins | |
Time to Polish | 8hours | |
Relationship between drying temperature and time of clear coat | ||
Tenmperture | Surface Drying time | Time to Polish |
25℃ | 20 mins | 8 hours |
60℃ | 10 mins | 2 hours |
infrared light | 5 mins | 1 hour |
Safety instructions :
-The use of appropricate personal protective equipment is recommended during application to prevent the irritation of the respiratory tract,skin and eyes.For professinal use only.
-After 15 minutes at 20 ℃,the base may masked and sprayed with another varnish or clear coat.
Storage :
Keep in a tightly covered container and in a dry and ventilated environment,avoiding exposure in sun directly.Temperature above 10℃ is recommended,between 15 and 30 ℃ optimal.
Optional Thinner for the clear coat
Item | Product name | Density | mixing ratio (2k coat : hardener:thinner) |
EX10 | High Quality Fast Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
EX20 | High Quality Standard Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
EX30 | High Quality Slow Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
EX50 | High Quality Extra Slow Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
D5 | Extra Slow Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
D3 | Fast Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
D2 | Standard Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
D1 | Slow Thinner | 0.85 | 1 :0.5: (0.2-0.3) |
Optional hardener for the clear coat
Item | Product name | Density | mixing ratio (clear coat : hardener:thinner) |
EC21 | Fast Drying Hardener to ES810 | 0.93 | 1 :0.5: (0.2-0.3) |
EC22 | Standard Drying Hardener to ES810 | 0.93 | 1 :0.5: (0.2-0.3) |
EC23 | Slow Drying Hardener to ES810 | 0.93 | 1 :0.5: (0.2-0.3) |
EC25 | Fast Drying Hardener to ES830 | 0.93 | 1 :0.5: (0.2-0.3) |
EC26 | Standard Drying Hardener to ES830 | 0.93 | 1 :0.5: (0.2-0.3) |
EC27 | Slow Drying Hardener to ES830 | 0.93 | 1 :0.5: (0.2-0.3) |
EC38 | 4:1 HS Hardener | 0.93 | 1 :0.5: (0.2-0.3) |
EC31 | Fast Drying Hardener to ES950/ES980 | 0.93 | 1 :0.5: (0.2-0.3) |
EC32 | Standard Drying Hardener to ES950/ES980 | 0.93 | 1 :0.5: (0.2-0.3) |
EC33 | Slow Drying Hardener to ES950/ES980 | 0.93 | 1 :0.5: (0.2-0.3) |
EC60 | 4:1 Hardener to ES850 | 0.93 | 1 :0.5: (0.2-0.3) |
EC908 | Fast Drying Hardener to ES999 | 0.93 | 1 :0.5: (0.2-0.3) |
EC907 | Standard Drying Hardener to ES999 | 0.93 | 1 :0.5: (0.2-0.3) |
EC906 | Slow Drying Hardener to ES999 | 0.93 | 1 :0.5: (0.2-0.3) |
EC909 | Fast dry hardener(EC909) | 0.93 | 1 :0.5: (0.2-0.3) |
EC300 | General hardener | 0.93 | 1 :0.5: (0.2-0.3) |
EC333 | HS Hardener(to ES7000/8000 Clear Coat) | 0.93 | 1 :0.5: (0.2-0.3) |
Additive details:
Item No. | Product Name | Feature | Funtion |
123 | Degreaser | Volatile transparent liquid | ①It is used to clean up the surface of metal. ②Dust removal, oil removal and anti-static resistance |
124 | Raccord Thinner | Transparent colorless liquid | Dissolve the interface position of the old and new paint, so that the old and new paint films are integrated, and the repair effect is more perfect. |
103 | Drying Additive | Volatile transparent liquid with light Yellow | If the ambient humidity is high, add 1% (based on weight) to make the main paint reach the normal drying time. |
120 | Retarder | Transparent colorless liquid | ①The addition amount is generally 10% of the total amount of paint. ②It can delay the drying speed of the paint surface. It is a slow drying diluent |
PS: The additives above do not have to be uesd with the paint ,it should according to climate situation of the using region. |