|
[China]
Trade Verify
Contact name:Zhang
Shandong Global Heavy Truck Import&Export Co.,Ltd |
|
Verified Suppliers
|
|
|
New Hydrualic Auger Crane Pile Drive Tractor Mounted Hammer Piling Machine 100HP
Product Description
Tractor mounted hammer piling machine can realize digging hole and planting pole. Its features are as below: has four hydraulic legs on the machine, off-road four-wheel drive, wide tire, working platform connect the body through 360 degree rotary gear, the end of the platform connect with the big arm shaft of the crane. One side of the hydraulic cylinder fixed on working platform and the other side connect with the crane boom, Both two sides of the crane boom installed with chute. There is mining shovel on the mining rod, one side connect with rotary drilling bit motor, the two sides of the rotary drilling bit bottom part insert into the chute of the crane boom. The front end of the crane boom is crane arm, the front end of the crane arm has hook. One side of the machine body has level console, the console connect test equipment hook-up hydraulic legs through hydraulic pipe. One side of the level console is control room, the control switch in the control room control the rotary drilling bit motor, hydraulic oil pump motor through power signal line. The operation arm control the hydraulic cylinder, 360 degree rotary gear motor, the digging part hydraulic winch motor, strength hydraulic hoist motor, overhang hydraulic winch motor through control valve. Combine its digging hole equipment with the traditional crane structure, can really one machine digging hole and planting pole, save the construction time and cost.
Product Parameters
| Model | BS-850 | BS-1004 | BS-1004H |
| Driver type | 4*2 | 4*4 | 4*4 |
| Power | 85HP | 100HP | 110HP |
| Steering system | Hydraulic system | Hydraulic system | Hydraulic system |
| Bit material | Alloy steel | Alloy steel | Alloy steel |
| Drill pipe reamer material | Manganese steel | Manganese steel | Manganese steel |
| Hole diameter(mm) | 100-2000 | 100-2000 | 100-2000 |
| Hole depth(mm) | 1000-6000 | 1000-6000 | 1000-6000 |
Overall size (L*W*H) mm | 5520*2100*2884 | 6520*2170*2894 | 7520*2170*2994 |
| Weight (T) | 6.5 | 6.8 | 7.1 |
| Hoisting machine | 3T,5T,8T | 5T,8T,10T | 8T,10T,12T |
| Dig a pit speed (/sec) | 25-60 | 25-60 | 20-60 |
| Practical geology | Sand and soil including cobble stone ,weathered rock and soil layer ,tundra and backfill garbage | ||
FAQ
1.What is the features of this machine?
Practical and efficient in pole erection working
Easy to operate and can be done by two labors only against the current manual practice of 12 to 14 labors, save manpower and with high efficiency.
Takes a little time to make a pit against the time taken by manual labor is 5 to 6 hours.
2. What is the application of this machine?
Hydraulic digging machine mainly using for pole hole digging and pole vertical,also can using for vertical Street lamp tree billboard wire rack, highway and railway construction, etc.
3. What is the max depth and diameter of this machine?
300-1200mm diameter and 1-6m depth is available.
Note that the final depth and diameter will subject to your special local working strata and drilling experience.
Product Picture
