|
[China]
Trade Verify
Address: Fumin Technopark B, Wen Tang Heng Ling Industrial, Dongcheng District,Dongguan,Guangdong Province,China.
Contact name:Claire Li
Ming Feng Lighting Co.,Ltd. |
|
Verified Suppliers
|
|
|
IP66 LED Aviation Obstruction Obstacle Light With Aircraft Warning Red White Beacon For Wind Turbine Control Tower
Feature:
This LED Medium-intensity Type A L865 Aviation Obstruction Light
flashing white color, designed for marking top of obstacle which
height is between 105-150 meters. Ultra high intensity CREE LED is
used for the light source ensure the long life experience and good
performance. Self-designed reflector is used to converge light,
which could reach the standard light intensity with as less as the
power consumption.
1.High-intensity LED technology for bright illumination and
long-distance visibility.
2.Available in various colors (such as red, white, or a
combination) based on application and regulatory requirements.
3.Advanced light control systems, including photocells or timers,
for automatic activation during low visibility or nighttime
conditions.
4.Durable and weather-resistant construction to withstand harsh
environmental conditions.
5.Self-diagnostic features to detect and report operational issues
for reliable functioning.
6.Essential for alerting pilots and aircraft personnel to the
presence of tall structures or obstacles.
7.Enhance aviation safety by minimizing the risk of collisions and
ensuring air navigation safety. Vital component of aviation
infrastructure worldwide.
Electrical
1.CREE ultra high intensity LED as light source saving power
consumption and maintenance than incandescent light or halogen lamp
2.Power supply available in DC(12V, 24V, 48V) or AC(110-240VAC)
Physical
1.Unique design and UV protected polycarbonate reflector for
converging light
2.UV protection Powder coated bright yellow color base make better
visibility
3.Base material is die casting aluminum which has strong corrosion
resistance, Shock and Vibrations protection
4.Pressure equalizing valve installed under the base to make sure
the air could go through but water is avoid, so that the whole
light temperature won't be high to avoid the moist air enter due to
pressure and temperature difference
System design
1.Built-in photocell for day/night operation(dusk to dawn
operation)
2.Surge and lightning protection
Optional
1.Dry contact Alarm output for remote monitoring
2.GPS synchronization
3.Infrared LED for pilot using NVG
| Light Source | CREE high intensity LED |
| Available Colors | White |
| Intensity(cd) | ≥20,000cd (Daytime)/≥2,000cd(Night) |
| Horizontal Output(degrees) | 360 |
| Vertical Divergence(degrees) | 3 |
| Flash Characteristics | 20-60 flashes per minute(factory setting: 20fpm) |
| Operation Mode | 24hours operation, 2 different modes |
| LED Life Experience(hours) | >100,000 |
Specification:
| Electrical Characteristics | |
| Lightning surge | IEC61000-4-5 L- N ±3kV |
| IEC61000-4-5 L- PE ±6kV | |
| IEC61000-4-5 N- PE ±6kV | |
| Electrostatic | IEC61000-4-2 Contact discharge 8kV |
| Environmental Factors | |
| Humidity | 0%-100% |
| Wind Speed | 80m/s |
| Waterproof | IP66 |
| Compliance | |
| ICAO | Annex 14 Volume 1, 'Aerodrome Design and Operations' Eight edition 2018, table 6.3 Medium-intensity Type A White Obstacle Light Medium-intensity Type B/C Red Obstacle Light |
| FAA | L-864/L-865 |
| Options Available | Bird deterrent spike |
| Dry contact alarm(NO COM NC) | |
| GPS sync flashing | |
| RS485 communication | |
| Infrared LED compatible for NVG (Night Vision Goggles) | |
Configuration:
| Model | Light source | Power input | Flash rate | Photocell | Dry contact Alarm | GPSsync flashing | Control |
| MF-MI-BF | LED IR LED&IR | 110-240Vac 12VDC 36VDC 48VDC | 20FPM (Type B&A) 30FPM (Type B&A) 60FPM (Type B&A) 40FPM (Type B&A) Fixed (Type C&A) | Built-in Photocell No Photocell | No Alarm Alarm | No SYNC GPS SNYC | Used alone Used with controller |
Dimension:
Installation:
(Mounting bracket is charged separately, and size is customized)
Wiring diagram:
Application:
MF-MI-BF medium-intensity light is used on the top of the High-rise Building, High Chimney, marking towers (Telecom, GSM, Microwave & TV), High Pole, Tower Crane, Wind Turbine, etc when the obstacle height is between 45-150 meters, and most time work with low intensity lights installed on the lower place
1.Tall Structures: Aviation obstruction lights are used to mark tall structures such as communication towers, skyscrapers, chimneys, and bridges, alerting pilots to their presence and preventing potential collisions.
2.Wind Turbines: Wind farms consist of multiple turbines, and each turbine is equipped with aviation obstruction lights to ensure their visibility to aircraft, especially during low-visibility conditions or at night.
3.Airports: These lights are crucial at airports to mark various structures, including control towers, hangars, runway lighting systems, and other buildings or equipment that may pose a potential hazard to aircraft.
4.Power Transmission Lines: Aviation obstruction lights are installed on power transmission towers and lines to ensure their visibility, preventing aircraft from coming into contact with the electrical infrastructure.
5.Helipads and Heliports: Helipads and heliports utilize aviation obstruction lights to mark their locations and guide helicopter pilots during takeoff, landing, and maneuvering procedures.
6.Construction Sites: Temporary structures like cranes, tall buildings under construction, and other obstacles at construction sites require aviation obstruction lights to ensure aircraft are aware of their presence and maintain a safe distance.
7.Offshore Installations:Oil rigs, offshore wind farms, and other offshore installations utilize these lights to mark their structures, ensuring the safety of aircraft operating in the vicinity.
8.Radio and TV Broadcast Towers: Broadcasting towers are equipped with aviation obstruction lights to ensure their visibility to aircraft, preventing potential collisions.
9.Mountainous Areas: Aviation obstruction lights are installed on mountains or hills to mark their presence to aircraft, aiding navigation and preventing accidents in challenging terrain.
10.Any other tall structures or obstacles that may pose a risk to aviation safety can benefit from the installation of aviation obst
.
Production&Testing:
FAQ:
Are you a manufacturer?
Absolutely, we are a professional manufacturer with 16 years of
experience.
Our products include IP67 waterproof recessed lights, aluminum
garden outdoor landscape lighting, inground buried lamp, and LED
underground lights.
What is your main product?
Our main products are as follows:
LED Triproof lights/ LED Vapor Tight Lights
LED High Bay Lights
LED Flood lgihts
LED Explosion Proof Lights
LED Down Lights
LED underwater lights (swimming pool lights, fountain lights,
underwater spotlights)
LED garden spot/spike lights
LED inground lights
What is the minimum order quantity (MOQ)?
For customized models, samples should be prepaid. We offer free
customized models if the order quantity is more than 1000 pieces.
What are the payment options?
We accept T/T, Western Union, Paypal. Payment terms are 50%
advanced payment and 50% balance payment. Our shipping terms are
EXW, FOB, and CIF, CNF and DDP
What is the delivery time?
The delivery time is about 5-7 working days for samples and 20-30
working days for mass production, depending on the quantity.
How are the products packaged?
Each piece is packed in an individual color box and then placed in
a strong master carton.
Why should you choose us?
1). We offer OEM/ODM services.
2). We have our own design team.
3). We offer high-quality products at reasonable prices.
4). We have no MOQ request.
5). Our sales team has 12 years of experience in underwater
lighting.
