Home Companies ZhangJiaGang City BOTTLING machinery Co.,Ltd.

Preform And Cap 90T 130T 180tons Injection Blow Molding Machine

Active Member

Contact Us

[China]

Address: JinGang town,Zhangjiagang city,JiangSu province, China

Contact name:Lane

ZhangJiaGang City BOTTLING machinery Co.,Ltd.

Preform And Cap 90T 130T 180tons Injection Blow Molding Machine

Country/Region	china
City & Province	jiangsu

Product Details

Description of Preform and cap 90T 130T 180tons injection blow molding machine

Features of of BL-1800 Preform and BL-1400 cap injection molding machine:

High precision

BL-1800 injection molding machine adopts full digital closed-loop control, with high precision, pressure can be accurate to 0.3bar, and flow is stable, especially when the flow is low, the advantages are more obvious. It adopts permanent magnet synchronous servo motor and special servo drive, with fast response speed, the response time is only 60m at 0-maximum flow, and about 100m at 0-maximum pressure.

Low oil temperature

The BL-1800 injection molding machine has no magnetic flow loss, so the oil temperature is the lowest compared to limited pump or variable pump memory. Furthermore, the use time of the hydraulic oil is fully extended, the wear of various seals is reduced, and the amount of cooling water is saved at the same time.

Low noise and long life

The internal gear pump imported from Germany is precise and stable. It has the advantages of small internal leakage, long service life and low working noise. Compared with ordinary fixed pump models, the noise is reduced by 20 decibels on average.

BL-1800 Servicing Energy-saving Adjustable Hydraulic Volume Injection Molding Machine

This machine adopts energy-saving devices such as motors with excellent performance; sensitive servo control system, quick start-up reaction time only needs 0.04S; servo motor and hydraulic system form a closed-loop control, which greatly improves the molding repeat accuracy compared with traditional injection molding machines; reduces power usage , Under ideal working conditions, this model can save electricity by 25%~80% compared with traditional injection molding machines; the noise of the whole machine is lower when it is running, which is significantly lower than that of traditional injection molding machines.

1. Electronic control system

1. It is equipped with advanced professional computer controller for injection molding machine, and the whole machine control system adopts full digital control, which has good controllability and high reliability;

2. Optimize the superposition and switching methods of the system power combination to maximize energy saving and improve response speed;

3. The software function is more powerful, and the injection molding machine has good scalability. It can provide expansion support such as gas-assisted and manipulator.

4. Built-in multiple sets of mold forming process parameter access system, which is convenient for the factory to manage the molds, can realize the rapid transfer of mold parameters, and the production preparation is high-speed and efficient.

2. Mold clamping system

1. The inwardly rolled five-point elbow elbow clamping mechanism can provide a strong clamping force in a short time

2. Increased internal spacing of tie rods and mold shifting stroke allow larger and deeper molds

3. Hydraulic motor drives automatic gear adjustment

4. Adjustable movable formwork support structure to reduce the load-bearing deformation of the tie rod

Equipment list of BL-1800 Preform and BL-1400 cap injection molding machine:

Items	Description	Model	Size-mm	Qty.
Part1: PCO1881 Preforms injection molding machine
1.1.1	Injection molding machine	BL-1800	480014501850	1set
1.1.2	15g PET preform mold(12 cavities, 1500pcs per hour)			1pcs
1.1.3	32g PET preform mold(12 cavities, 1500pcs per hour)			1pcs
1.2	Dryer	100KG	10306951120	1set
1.3	Water Chiller	10P	11508001150	1set
1.4	Plastic materials feeder	300G	450380600	1set
1.5	Colour mixing machine	100KG	10209801360	1set
Part2: Matching Caps injection molding machine:
2.1.1	Injection molding machine	BL-1400	450011001700	1set
2.1.2	2.5g PP caps mold(12 cavities, 1500pcs per hour)			1pcs
2.2	Dryer	100KG	10306951120	1set
2.3	Water Chiller	10P	11508001150	1set
2.4	Plastic materials feeder	300G	450380600	1set
2.5	Colour mixing machine	100KG	10209801360	1set
Part3: Share auxiliary device both for two injection plants:
3.1	Plastic Crusher	400 Model	9808401300	1set

Parameters for BL-1800 preform Injection molding machine

Specification		unit	BL-1800
Injection unit	Screw diameter	mm	45	48	50
	Screw l/D Ratio	L/D	23.3	21	19.1
	Shot size(theoretical)	cm3	373	426	451
	Injection weight	g	336	383	406
	Injection rate	g/s	138	159	180
	Injection pressure	Mpa	196	172	158
	Screw speed	rpm	0-200
Clamping unit	Clamping force	KN	1800
	Toggle stroke	mm	430
	Space between Tie -Bars	mm	460×460
	Mould height	mm	180-500
	Ejector stroke	mm	135
	Ejector tonnage	KN	40
Others	Max pump pressure	Mpa	16
	Pump motor power	kw	15
	Heating power	kw	8.9
	Machine dimensions	m	4.8×1.45×1.85
	Machine weight	t	5.1

Parameters for BL-1400 cap Injection molding machine:

Specification		unit	BL-1400
Injection unit	Screw diameter	mm	40	42	45
	Screw l/D Ratio	L/D	22	20	18.6
	Shot size(theoretical)	cm3	232	257	287
	Injection weight	g	209	231	258
	Injection rate	g/s	91	110	128
	Injection pressure	Mpa	202	183	159
	Screw speed	rpm	0-200
Clamping unit	Clamping force	KN	1400
	Toggle stroke	mm	380
	Space between Tie -Bars	mm	420×420
	Mould height	mm	170-430
	Ejector stroke	mm	120
	Ejector tonnage	KN	33
Others	Max pump pressure	Mpa	16
	Pump motor power	kw	13
	Heating power	kw	7.7
	Machine dimensions	m	4.5×1.1×1.7
	Machine weight	t	4.1