|
[China]
Trade Verify
Address: No.2-A-609, NO.1 Longyu Road, Jianxi District, Luoyang, Henan, China
Contact name:David
Luoyang Zhongtai Industries CO.,LTD |
|
Verified Suppliers
|
|
|
Impact Crusher With Large Feed Particle Size And High Compressive Strength
The PFQ series of powerful vortex impact crushers is a highly
efficient crushing equipment, suitable for coarse, medium and fine
crushing operations of various materials with a compressive
strength not exceeding 250MPa.
The working principle Of Stone crusher machine
This machine is mainly composed of the vortex crushing chamber and
the P section crushing area formed by the upper frame (left and
right), the lower frame, the rotor section, the first adjustment
section (S crushing section), the second adjustment section (T
crushing section) and the transmission section.
The motor is driven by a V-belt to rotate the rotor at high speed.
Materials enter the crusher cavity from the feeding port and are
struck by the high-speed rotating rotor plate hammers. After being
impacted by the toothed impact plate at the top of the vortex
crushing cavity, they rebound and fall freely, constantly colliding
and crushing with the materials that are subsequently impacted
upwards. The huge pressure and bending force generated by the
thick-toothed plate and the plate hammer at the top of the P
crushing chamber cause the large pieces and materials that are not
fully crushed. Even the materials that are very difficult to crush
can be roughly crushed and enter the next S crushing chamber.
The gap between the toothed liner in the S crushing chamber and the
rotor hammer plate is relatively small. The material is subjected
to friction, impact, breakage and compression here to obtain medium
crushing and then enters the T crushing chamber for fine crushing.
The gap between the toothed liner plate of the T crushing chamber
and the rotor hammer plate is smaller. The material is further
crushed by friction, impact, breakage and compression, and then
discharged outside the machine.
The gap between the toothed liners of the S and T crushing chambers
and the rotor hammer plates can be adjusted according to the user's
requirements for the particle size of different materials. The
T-shaped crushing chamber is equipped with an elastic device. When
unbreakable materials enter the T-shaped crushing chamber, the
elastic device has a retracting and buffering effect, increasing
the size of the discharge port and allowing the unbreakable
materials to be discharged outside the machine. When the
unbreakable material is discharged, under the elastic effect, the
discharge port returns to its original size.
Structural features Of Stone crusher machine
In terms of structural design, a unique vortex crushing chamber and
curved three-chamber crushing are adopted. The gap between the
toothed liner and the hammer in the medium and fine crushing cavity
can be conveniently adjusted to effectively control the particle
size of the output. High wear-resistant plate hammer, insertable
installation form; The multi-directional door opening of the frame
and the rear upper box frame lead screw or hydraulic opening device
make the replacement of vulnerable parts and maintenance more
convenient.
Performance characteristics
High-efficiency crushing: It features a large vortex crushing
chamber and three-stage crushing zones, ensuring high crushing
efficiency and large production capacity.
Excellent particle shape: The product is cubic in shape, with
uniform particle shape, meeting the standards for building
materials.
Easy to maintain: The structure design is reasonable, with
multi-directional doors, making it convenient to replace vulnerable
parts and carry out maintenance.
Energy conservation and environmental protection: Low energy
consumption, high output, and in line with environmental protection
requirements.
Stone crusher machine product parameters
| Model | Rotor Size(mm) | Maximum Feed Size(mm) | Discharge Size(mm) | Capacity(m3/h) | Power(kw) | Dimensions L×W×H(mm) | |
| -150Mpa | -250Mpa | ||||||
| PFQ0808 | ф850×750 | 200 | 150 | 25(80-90%) | 40 | -55 | 1900×1860×2150 |
| PFQ1108 | ф1040×750 | 300 | 180 | 30(80-90%) | 95 | -90 | 2730×2210×2300 |
| PFQ1110 | ф1040×1000 | 400 | 200 | 35(80-90%) | 110 | -110 | 2730×2460×2300 |
| PFQ1310 | ф1280×1000 | 500 | 250 | 40(80-90%) | 175 | -160 | 3365×2790×2900 |
| PFQ1313 | ф1280×1250 | 600 | 250 | 40(80-90%) | 220 | -220 | 3365×30400×2900 |
| PFQ1315 | ф1280×1500 | 700 | 300 | 50(80-90%) | 285 | -300 | 3365×3300×2900 |
| PFQ1515 | ф1450×1500 | 1000 | 350 | 50(80-90%) | 400 | -400 | 4310×3330×3660 |
| PFQ1520 | ф1450×2000 | 1000 | 400 | 50(80-90%) | 540 | -550 | 4310×3330×3660 |
Photo Explanation
FAQ
Q: Why we believe in luoyang zhongtai industries co., ltd:
A: 1. More than 30 years experience.
2.We are the leading professional supplier of mining machinery,
construction machinery, machines casting and forged parts
3. All products achieved ISO9901:2000 quality management
certificate and CE, ROHS certificates.
Q:Delivery time
A: parts lead time 1-2months, machines 2-3months.
Q:Payment terms
A: Accept payment type: T/T, L/C, Western union,Cash.
30% deposit when signed contract. Full payment paid before shipping
Q: Quality warranty?
A: guarantee time: one year for main machinery. If something wrong
we will provide the technical advice and find solution immediately.
For those wearing parts we guarantee high quality parts for
long-term supply.
Q: After sales service?
A: we can supply technical guide for machines running test and
parts maintenance if end user needs.
Aftersales service
ZTIC Heavy Industries is your business partner in the After Market.
ZTIC able to provide:
1. ENGINEERED SPARES - DESIGN AND MANUFACTURING
2. LARGE VOLUME STEEL AND IRON CASTING FOUNDARIES
3. HUGE MACHINE SHOP CAPABILITIES
4. TRAINING PROGRAMMES
5. PREVENTATIVE MAINTENANCE PROGRAMS
6. PREVETATIVE MAINTENANCE SERVICES
7. COMPREHENSIVE MAINTENANCE PROGRAMS
