Active Member
|
[China]
Address: 1200 N Fuxing Rd Wutong Dist Tongxiang 314500 Zhejiang P. R China
Contact name:Warren Sun
Pasia Industries Ltd |
|
|
Three Cores Mineral Insulated Heating Cable for Electric Heater Heating Element is a special heating cable of three-core conductors insulated with mineral magnesium oxide sheathed with metal material to be used on manufacturing electric heater for industrial use.
Application
| Nuclear industry | construction -- asphalt heating |
| Metal manufacturing industry- low melting point alloy melting | tank/vessel heating |
| Shell heating for the extruder | Heat tracing for high temperature industrial piping |
| anticoagulation and viscosity reduction of process media | All kinds of industrial electric heaters |
Specification
Heating cable instruction code
MI SS-B 16K6560/60/2520/220/E1
NO. 1 2 3 4 5 6 7
| No. | Instruction | |
| 1 | Sheath material | Stainless steel |
| 2 | structure of cable components | shown in table 1 |
| 3 | cable codes | shown in table 2, 3 and 4 |
| 4 | length of heating cable | In meter |
| 5 | Heating cable power | In Watt |
| 6 | heating cable voltage | In Volt |
| 7 | heating cable voltage | See table 5 |
Cable Code
| Serial NO. | Instruction | |
| 1 | core number | 1 or 2 |
| 2 | Voltage grade | 3=300V, 6=600V |
| 3 | conductor materials | K,N,C |
| 4 | cold resistance ×1000 | 6560=6.56Ω/m×1000 |
1 6 K 6560
No 1 2 3 4
Table 1 Structure of Cable Element
Terminal specifications
| Model: A, D, E | Model: B | |||
| Maximum Voltage (V) | Maximum Current (A) | Terminal Specification | Maximum Current (A) | Terminal Specification |
| 600 | 15 | E2 | 20 | E1 |
| 600 | 20 | E2 | 25 | E2 |
| 600 | 30 | E3 | 40 | E2 |
| 600 | 50 | E3 | 70 | E2 |
| 600 | 70 | E3 | 100 | E3 |
Note 1: E1 means 1/2 "NPT;E2 means 3/4 "NPT;E3 represents 1 "NPT (taper thread);Additional connection thread requirements are available.
Note 2: the length of cold end cable with standard configuration is 2 meters. If increase or decrease of length required, please contact our professional personnel.
Corresponding reference table between the output power and sheath temperature
Anticorrosive specification
| Material | Application |
| Sulfate | Not Recommend |
| Hydrochloric acid | Not Recommend |
| Hydrofluoric acid | Not Recommend |
| Phosphate | Not Recommend |
| Carbonate | According to the real Data |
| Organic acid | Applicable at any condition |
| Alkali metal | Acceptable |
| Sea water | Not Recommend |
| Chloride | Not Recommend |
Explosion-proof instructions
MISS series heating cable with explosion-proof terminal, can be used in potential explosive environment. Authenticated by the Chinese CQST, in accordance with Chinese GB3836 explosion-proof electrical standards, they can be applicable to Ⅱ A, Ⅱ B, Ⅱ C (C1D2) level of explosion-proof electrical equipment.
