Shenzhen General Welder Technology Co., Ltd. |
|
CUT40 IGBT SINGLE PHASE 40AMPS PLASMA CUTTER IGBT Plasma Cutter Air Inverter Plasma Cutting Machine
1. Air Plasma Arc Cutter takes compressed air source and AC current
as energy source, at low cost in cutting.
2. Suitable for stainless steel, aluminum, copper, titanium, cast
iron, carbon steel, alloy steel, alloy metal and nearly all the
metals cutting.
3. High cutting efficiency
4. Complete accessories: Cutting torch, welding cable, earth clamp,
carton box.
Technical Parameter:
Inverter Air Plasma Cutter | CUT-40 |
Input power voltage(V) | AC220V±10% |
Frequency(Hz) | 50/60 |
Rented input power capacity(KVA) | 4.9 |
Rate input current(A) | 44.2 |
No-load voltage(V) | 220 |
Current range(A) | 15-40 |
Rated output voltage(V) | 96 |
Rated duty cycle(%) | 50 |
No-load power(W) | 40 |
Efficiency(%): | 85 |
Power factor | 0.93 |
Insulation class | B |
Protection class | IP21 |
Arc-starting | Touch |
Air pressure | 0.4 |
Gas flow(L/min) | 80 |
Max Thickness(mm): | 12 |
NW(kg) | 8.5 |
Dimensions(mm) | 371*153* 233 |
Advantages Of Electric Welding Machine:
Electric welding machine uses electric energy, which can be
converted into heat energy instantaneously, electric is very
common, electric welding machine is suitable for working in dry
environment, does not need too many requirements, because the
volume is small, the operation is simple, the use is convenient,
the speed is faster, the advantages such as the strength of welds
after welding are widely used in various fields, especially for
products requiring high strength, which can instantly connect the
same metal material (or dissimilar metal, but different welding
method) permanently, after heat treatment, the weld is as strong as
the base metal and sealed well, which solves the problem of sealing
and strength for the manufacture of storage gas and liquid
containers.
Introduction to the principle of electric welding machine:
The electric welding machine, which uses inductance to make contact
and the object to be touched to complete the welding function, is
actually an extremely high power transformer, which can complete
the conversion of electric energy to thermal energy in an instant,
with the advantages of simple operation, convenient carrying, fast
speed and strong performance, it has been widely used, whether in
actual use or in the school laboratory.