Round Plane Antenna 34W Dimmer Motion Sensor Ceiling Mounted Design

Round Plane Antenna 34W Dimmer Motion Sensor Ceiling Mounted Design

Round Design Plane Antenna For Ceiling Light Dusk Dimmable Motion Sensor

Features:

1. Constant current output.

2. On/off control by relay.

3. Tri-level control by 1-10V output.

4. Suitable for ceiling lights and Bulkhead.

5. Sensitive and reliable

6. IP 20 and 3 years warranty.

Technical data: 

On/Off Control             Detection Area                 Hold Time             Daylight Sensor

Stand-by dimming            Stand-by                 Output Current        

level                                  Period

Dtection Area:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6M.

Wiring diagram:

Output current setting:

Set the current to be 350mA by plugging black cap on 1 and 2 PIN,and 300mA by plugging on 2 and 3 PIN.

Setting:

1: Detection area:

In this area, movement will be detected and able to trigger the sensor. 100% detection area is also known as the strong sensitvity.

2-3: Hold time:

The period of light keeping 100% brightness after moving objects leave the detection area.

4-5: Daylight threshold:

Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it's preset as "disable", the sensor works everytime it detects motion regardless the ambient brightness.

6-7: Stand-by period:

The period of light keeping low output before it's completely switched off. When it's preset as"∞“, the light always keep at low output if no movement in the detection area and doesn't turn off.

8: Stand-by period:

The definition of low output in the standby period.

Daylight periority:

Dusk/Dawn sensor:

Our special active photocell technology can tell the difference between natural light and LED light, to

ensure the light will be off when needed.

With Daylight priority function, HT30V is able to differentiate artificial light brightness from

Application:

1. Automatically ON/OFF function: 

Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".

With sufficient daylight,even          With insufficient daylight,               After the last detection and the 

when motion detected,light            when motion detected,                   present hold time elapsed,

remains OFF.                                 light ON.                                          light OFF.

2. No daylight function:

The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.

When motion is detected,               After people leave the                   After the last detection and

the sensor will switch on the          detection area,light remains          the present hold time

light to 100% brightness.               100% brightness within                 elapsed,light OFF.

                                                      hold time.

3. Function demo-dimable control/corridor function

With sufficient daylight,even          With insufficient daylight,                After the last detection the light

when motion detected,light            when motion detected,                   will be dimmed down to the 

remains OFF.                                  light ON.                                         stand-by dimming level

                                                                                                             (10% or 30%)after hold time