Ceiling Mounted 18W Dimmable Motion Sensor 8 Dialing Code Plane Antenna

Ceiling Mounted 18W Dimmable Motion Sensor 8 Dialing Code Plane Antenna

Plane Antenna 8 Dialing Code Smart Lighting Control Output LED Power 18W

Features:

1. Suitable for small size areas such as aisle,staircaase,horizontal,bathroom,kitchen.

2. Power factor be equal or greater than 0.9.

3. Obtain EMC certification,and certificate number is EN55015.

4. Use quarantine protocal,safe and reliable.

5. Operating temperature would be –20℃–+50℃.

6. IP 20 and 3 years warranty.

Technical data: 

On/Off Control             Detection Area                 Hold Time             Daylight Sensor

Stand-by dimming            Stand-by                 Output Current        

level                                  Period

Dtection Area:

The fixture indicates teh maximun distance at the highest mounting height with 100% sensitivity.

Typical installation height 2.5-6M.

Mechanical structure:

Dimensions:

Wiring diagram:

Setting: 

By dialing the code you can set the parameters you want to achieve the effect you want.

Detection area:      Hold time:           Daylight threshold:        Stand-by period:       Stand-by period:

In this area,         The period of            Definition of the            The period of             The definition

movement will     light keeping            ambient brightness;       light keeping              of low output

be detected         100% brightness        only when the                low output                 in the stand-by

and able to          after moving             ambient brightness        before it's                   period.

trigger the           objects leave            is lower than the             completely

sensor.100%        the detection            preset specific                switched off,

detection area      area.                        lux amount,the               when it's preset

is also known                                      sensor will be work;        as"∞",the light

as the strong                                       when it'spreset as           always keep at

sensitivity.                                         "disable",the sensor           low output if

                                                          will work everytime          no movement in

                                                          it detects motion              the detection

                                                          regardness the                 area and doesn't

                                                          ambient brightness.          turn off.

Installation Method:

The installation finished product drawing is shown:

Application:

1.Automatically ON/OFF function: 

Light on when detect movement and off after people leave at night.Applications:Corridor,Staircase.The daylight threshold is set to"2Lux,10Lux,50Lux".

With sufficient daylight,even          With insufficient daylight,               After the last detection and the 

when motion detected,light            when motion detected,                   present hold time elapsed,

remains OFF.                                 light ON.                                          light OFF.

2.No daylight function:

The daylight threshold is set to"Disable".Light on when detect movement,after people leave,light off after stand-by period,Applications:Dim places such as basement parking ,underpass.

When motion is detected,               After people leave the                   After the last detection and

the sensor will switch on the          detection area,light remains          the present hold time

light to 100% brightness.               100% brightness within                 elapsed,light OFF.

                                                      hold time.

3.Function demo-dimable control/corridor function

With sufficient daylight,even          With insufficient daylight,                After the last detection the light

when motion detected,light            when motion detected,                   will be dimmed down to the 

remains OFF.                                  light ON.                                         stand-by dimming level

                                                                                                             (10% or 30%)after hold time       

After the stand-by period,

light OFF.

Application:

User Notes:

1. Microwave can penetrate walls or glass thinner than 20cm and attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting height and movement volume.
4. Conduct test on sunny days without the lampshade which will affect the tested lux value.

5. Factory default setting:detection area 100%/hold time 5s/daylight threshold disable/satnd-by period 0s/stand-by dimming level 10%.