Rod Antenna Microwave Motion Sensor Max 100W With Switch ON / OFF Function

Rod Antenna Microwave Motion Sensor with switch ON/OFF function to installed inside of the lighting fixture

Features:

• 5.8GHz Micorwave Motion Sensor with rod antenna module.
• DIP switch is on the opposite side of the rod antenna which won’t need to open a hole for adjusting the DIP switch.
• Switching ON/OFF function.
• With rod antenna module which make it happen to open a very small hole with only removing 1-2 light beads to avoid any shading.
• Rod antenna design which mostly improve the stability of the sensor when installed backside of the metal board inside of the lighting fittings.
• Automatically detect the daylight and remain OFF even detect any movement when the natural light is sufficient.
• Mounting height could be 4M and detection diameter could be 12M.
• Getting different effect and requirements by selecting different detection area, hold time and daylight threshold set by the DIP switch.
• IP Rating would be IP20 and 5 years of warranty.
• Certificate of TUV, CE, RED, SAA.

Specifications:

   ON/OFF              Daylight sensor           Detection area       

   Hold time          Warranty of 5 years              

Wirng diagram:

4-pole press-in terminal (L, N,N,L′). N,L for connecting with main supply and N, L’ for connecting with LED Driver which make it very easy to be assembled

Dimensions:

Rod antenna design with size of 76.9 X 39.9 X 27.7mm which could be easily installed inside of ceiling light and panel light with open a super small hole on the light board.

Detection coverage:

Max. detection range will be 12m for ceiling mounted.

Dip Switch Settings:

   Detection area                         Hold time                          Daylight threshold

   Detection area means            Hold-time means the         Daylight sensor priors

   detection coverage. It            time period the light          to motion sensor. Set

   can be adjusted by                will be ON,after the            threshold for specific

   combining DIP                       last detection.                    needs. If disable, only

   switches for specific                                                        motion sensor works.

   application.

Demo:

With sufficient daylight,                                                         With insufficient daylight,when 

even when motion                                                                  motion detected,light ON.

detected, light remains OFF.

After last detection,the light will be                                                 

dimmed down to the stand-by

dimming level after holdtime.

Applications:

The motion sensor can penetrate most of objects such as glass, wood, plastic but metal. It won’t be affected by ambient temperature, dust and widely applied in office, corridor, fire exit, warehouse, basement and other indoor lighting places for saving energy.