|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Detached Ceiling Mounted 6m 19.68ft On Off Switch Sensor
Detached design mouting height up to 6m lighting control milky shell notion sensor
Features of ON/OFF Sensor:
1. IP 20 and 5 years warranty
2. Automatic On/off control with Daylight sensor
3. Better protection products with zero crossing detection function
4. The detection range, delay and light sensitivity parameters are set by dial code
5. Compact sized particularly suitable for Tri-Proof lights
Installation of Microwave sensor:
The sensor head has a 4-minute mounting mode
Mechanical structure of Microwave sensor:
| Certificate | RoHS CE |
| Detection area | 10%/50%/75%/100% |
| Setting mode | By 6 DIP switch |
| Hold time | 5s/90s/5min/15min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Mounting height | 2.5-6m/6.56-19.68ft (ceiling mounted) |
| Detection range | Max,ø14m/45.92ft (ceiling mounted) |
| Temperature | -20°C~+55°C |
| Warranty | 5 years |
| Detection area: In this area,movement will be detected and able to trigger the
sensor.100% detection area is also known as the strong sensitvity. |
| Hold time: The period of light keeping 100% brightness after moving objects
leave the detection area. |
Daylight threshold: Definition of the ambient brightness; only when the ambient
brightness is lower than the preset specific lux amount, the sensor
will work; when it's preset as "disable",the sensor works everytime
it detects motion regardless the ambient brightness. | |
| With sufficient daylight,even when motion detected,light remains OFF. | |
| With insufficient daylight,when motion detected,light ON. | |
| After the last detection,and the present hold time elapsed,light OFF. |
| When motion is detected, the sensor will switch on the light to 100% brighteness. | |
| After people leave the detection area, light remains 100% brightness within hold time. | |
| After the last detection and the present hold time elapsed, light OFF. |
Wiring diagram of Microwave sensor:
| Control mode | ON/OFF |
| Connection type | Amphenol connector(L,N,N,L') |
| Stand-by power | ≤0.5W |
| Microwave frequency | 5.8GHz±75MHz |
| Motion detection | 0.5~1.5m/s |
Microwave power | <0.3mW |
| Operating voltage | 220-240VAC 50Hz/60Hz |
| Switch capacity | Max.400W(Control gear); Max.800W(Incandescent lamp) |
