|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Features
-battery overcharge
protection
-battery over-discharge
protection
-output overload protection
-short-circuit protection
Parameter Table
| Input voltage | 220-240 Vac 50/60Hz |
| Input Current | 0.06A(Max) 230V AC |
| Power Factor | ≥0.5 |
| Battery charging current | 200mA(Max) |
| Battery charging time | 24h(Max) |
| Working temperature | 0-60°C |
| Maximum shell temperature | 75°C |
| Storage temperature | -20-60°C |
| Electric strength | 3000Vac 5mA(input to output) |
| IP Rating | IP20 |
| Warranty | 3 Years |
Model Selection table
| Model No | Input voltage |
Output voltage
| Output current | Lithium battery | Emergency time | Emergency power |
| ES-EOD02-01S | 220-240Vac 50/60Hz | 20-60V DC | 100-30mA | 1800mAh/7.4V | 3Hrs | 2W |
| ES-EOD03-01S | 220-240Vac 50/60Hz | 20-60V DC | 150-50mA | 2000mAh/7.4V | 3Hrs | 3W |
| ES-EOD04-01S | 220-240Vac 50/60Hz | 20-60V DC | 200-60mA | 2500mAh/7.4V | 3Hrs | 4W |
| ES-EOD05-01S | 220-240Vac 50/60Hz | 20-60V DC | 250-80mA | 3000mAh/7.4V | 3Hrs | 5W |
| ES-EOD06-01S-1H | 220-240Vac 50/60Hz | 20-60V DC | 300-100mA | 1800mAh/7.4V | 1H | 6W |
Dimension (Unit:mm)
Wiring Diagram
Operation Instructions
1. Connect the wires according to the wiring diagram.
2. Power on L and N, and close the switch S1. At this time, the
load light will turn on, the indicator light of the emergency power supply will turn green, and the emergency power supply is
charged normally. Turn off this switch S1, the load light will go out.
3. Simulated emergency: close switch S1, turn on the load light,
and then press the switch (TEST SWITCH), then switch to emergency power supply mode, the green light of the emergency power
indicator will go out. Then release the switch (TEST SWITCH), at this time it should be switched to external drive
power supply, the green light of the emergency power indicator will light up.
4. Power failure and incoming call, the phenomenon should be the
same as simulated emergency.
Battery Application Notice
