Active Member
|
[China]
Address: Guilin City
Contact name:Henry
Guangxi Henkry Machinery Co., Ltd |
|
|
Non-Ferrous Metal Flotation Separator With Easy Operation And
Maintenance:
Flotation machine is self-prime air&puple, tank is frontloaded, good for bubble returning; It has double blades impeller,has good mixing low consumption; horizontal placement,no need bubble pump; Imepllers have slow rotation speed, Impeller cover has durable life;The pump is double cycling in fixed form of up & down,which is good for coarse ore to suspended.
Agitator of Non-Ferrous Metal Flotation Separator:
Each flotation cell has been designed with triple
functions including air-suction, pulp-suction and flotation
separation respectively, by which a self-circulation flotation
process is formed without the necessity for other auxiliary
equipment.
Logical design of pulp circulation can reduce settling of grit to
the largest extent.
Equipped with self-controlling system, depth and
surface of pulp contained in each cell can be conveniently
adjusted.
Impeller is composed of up and bottom impeller vanes, by which up
circulation and bottom circulation of pulp can be produced
separately.
Working principle of Non-Ferrous Metal Flotation Separator:
The impeller is rotated by V-belt of motor and produces negative pressure by centrifugal function. Enough air is sucked to mix slurry, and slurry mixes drug at the same time. Mineral sticks on bubble completely and floats on the surface of slurry to form mineralized bubble. Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface, One or more gas chambers are installed in the bottom of the tub, on the cover of the gas chamber are full of one-way valves. when the one-way valves are open, the pressed air will be fed into the flotation cell.
Application of Non-Ferrous Metal Flotation Separator:
Non-Ferrous Metal Flotation Separator be used to separate non-ferrous metal, ferrous metal, noble metal, non-metallic mine, chemical material. It can be used in roughing, scavenging, selection or reverse flotation. In the flotation process, after being mixed with drug, some qualified mineral attaches on bubble, floats on the surface of slurry and is scraped out, other mineral still stays in the slurry, so the separating purpose is finished.
Flotation stages of Non-Ferrous Metal Flotation Separator:
Roughing: The first stage is called roughing, which produces a rougher concentrate.
Cleaning: The rougher concentrate is normally subjected to further stages of flotation to reject more of the undesirable minerals that also reported to the froth, in a process known as cleaning.
Scavenging: The rougher flotation step is often followed by a scavenger flotation step that is applied to the rougher tailings.
Technical Data of Flotation Separator:
| Model | Capacity | Power(kw) | Dimension(m) | Pipe connection(DN) | ||||||
| (m3/h) | Recycle pump | Air compressor | Skimming system | L/L1 | W/W1 | H/H1 | (a) Water inlet | (b) water outlet | (c) sludge outlet | |
| HK-002 | 1~2 | 0.75 | 0.55 | 0.2 | 3.2/2.5 | 2.4/1.16 | 2.2/1.7 | 40 | 40 | 80 |
| HK-003 | 1~3 | 0.75 | 0.55 | 0.2 | 3.5/2.8 | 2.4/1.16 | 2.2/1.7 | 80 | 80 | 100 |
| HK-005 | 1~5 | 1.1 | 0.55 | 0.2 | 3.8/3.0 | 2.4/1.16 | 2.2/1.7 | 80 | 80 | 100 |
| HK-010 | 1~10 | 1.5 | 0.55 | 0.2 | 4.5/3.8 | 2.7/1.36 | 2.4/1.9 | 100 | 100 | 100 |
| HK-015 | 1~15 | 2.2 | 0.75 | 0.2 | 5.5/4.5 | 2.9/1.6 | 2.4/1.9 | 100 | 100 | 100 |
| HK-020 | 1~20 | 3 | 0.75 | 0.2 | 5.7/4.8 | 3.2/2.2 | 2.4/1.9 | 150 | 150 | 150 |
| HK-030 | 1~30 | 3 | 0.75 | 0.2 | 6.5/5.5 | 3.2/2.2 | 2.5/2.0 | 150 | 150 | 150 |
1. Quality control
All the equipment offered are produced by China national standard
drawings, nonstandard equipment will be produced by the drawings
confirmed by clients. Clirik Machinery strictly follows ISO 9001:
2008 Quality management system. Most equipment will be test for at
least 8 hours in the factory before delivery. There is record in
computer for each equipment, spares can be easily confirmed when it
is necessary.
2. Way of payment
Various ways of payment, T/T, against copy of B/L, L/C, D/A, D/P,
West union, etc. All can be negotiated.
3. Delivery time
Normal delivery time within 10 to 30 working days, complete
production line or larger equipment may take longer. Exact delivery
shall be confirmed when place the order.
4. Trade terms
Typically EXW, FOB, CIF, CFR, DAF follows International Rules for
the Interpretation of Trade Terms 2010(INCOTERMS 2010).(you are
also welcome to take the rule of Alibaba Trade Assurance)
5. Shipping lines
Priority rule based on clients' request, and freight cost, service,
shipping date, date of arrival shall be considered.
6. Installation
Clirik has several experienced technicians with passports ready to
go for installation, when installation service is needed, the
client should pay for technicians’ round way air tickets,
salary(shall be confirmed before leaving), food and lodging, most
importantly to guarantee the technicians’ safety.
7. Equipment warranty
18 months warranty, can be extended to 12 months as request.
