|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist
Contact name:Aleen
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
VSM0810 is a precision micro stepping motor body outer diameter
8MM, body length 8.2MM, shaft outer diameter 1MM, the shaft length
can be changed according to the needs, and can be equipped with
gears, pulleys,
Corresponding output devices such as worm and screw.
The motor has a basic step angle of 18 degrees and the motor runs
20 steps per week.
Because of its small size, high precision, and easy control, this
miniature stepper motor is widely used in cameras, optical
instruments, lenses, flashlights, precision medical equipment,
automatic door locks and other fields.
The motor input part of the FPC, but can according to the customer
demand can be changed to a connecting line needle, PCB and other
forms.
The mounting bracket can be changed according to the customer's
request.
At the same time, we can match the corresponding drive system to
meet the needs of customers!
Our team has more than 10 years of stepper motor design,
development and production experience, so we can achieve product
development and auxiliary design according to the special needs of
customers!
Customer needs are our efforts, please feel free to contact us!
This miniature motor is mainly used in cameras, lenses, optical instruments and other fields. The light needle is relatively small in size and the control is very precise. The needs of customers are the direction of our efforts, and meeting the needs of customers will be our highest pursuit. If you have needs, please feel free to keep in touch with us.
8mm micro stepper motor parameter sheet:
| PRODUCT NAME | 8 MM MICRO STEPPER MOTOR |
| MODEL | VSM0810 |
| RATED VOLTAGE | 5.0 V DC |
| COIL RESISTANCE | 16Ω±10% |
| NO.OF PHASES | 2 PHASES |
| STEP ANGLE | 18°/STEP |
| MAX. STARTING FREQUENCY | 800 PPS min. (AT 5.0 V DC) |
| MAX. SLEWING FREQUENCY | 2000 PPS min. (AT 5.0 V DC) |
| PULL IN TORQUE | 2.8 gf-cm min. (AT 480 PPS , 5.0V DC) |
| PULL OUT TORQUE | 3.8 gf-cm min. (AT 480 PPS , 5.0V DC) |
| INSULATION CLASS | CLASS E FOR COILS |
| INSULATION STRENGTH | 100V AC FOR ONE SECOND(3mA MAX) |
| INSULATION RESISTENCE | 1 MΩ (DC 100 V) |
| OPERATING TEMPERATURE RANGE | -10~+60 ℃ |
| OEM & ODM SERVICE | AVAILABLE |
8mm micro stepper motor outside drawing:
8mm Screw Stepper Motor 5V DC 2 Phase 18 Degree Step Angle Micro Stepper Motor
1. The stepper motor is controlled by pulse signal. Each time a pulse is input, the stepper motor is pushed forward one step.
2. The rotation step angle of the stepping motor is based on the
structure of the motor and is realized in a certain proportion.
3. In practice, there will be slight differences in the rotation
step angle of the motor. This is because the structure of the motor
is fixed, and the total number of poles will not be accumulated,
and the higher the processing accuracy will be. In general, the
step angle of an industrial hybrid stepper motor is 1.8°, or 200
poles.
