|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist
Contact name:Aleen
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
The 35BYJ46 is a permanent magnet stepping motor with a gearbox
with a diameter of 35mm.
The step angle of a single motor is 3.75°/step.
It has a top gear ratio of 42.5, so the step angle is 3.75°/42.5.
This motor is suitable for 12V DC drive.
A conventional PM unipolar stepper motor driver can drive this
motor.
If you are interested in this product, please feel free to contact
us.
| Motor type | PM stepper motor + gearbox |
| Model No. | 35BYJ412P |
| Driving mode | Unipolar driving (5 cables) |
| Phase number | 4 |
| Gear ratio | 85:1 |
| Step angle | 7.5°/85 |
| Coil resistance | 130Ω±7% |
| Rated voltage | 12 V |
| Weight | About 55 g |
Stepper motors are used for precise control, widely used on medical
equipment, 3D printer, industrial precise control, automation
equipment, etc.
Stepper motors can be used in any mechanisms requirement precise
conrtol and rotational/linear movement.
Stepper motor can reach precise control even without close-loop
encoders / without feed back system, also they do not have
electrical brushed. Thus there is no electromagnetic interference
and electrical sparks issues. In some cases, they can replace DC
brushed motors/ brushless motors.
Stepper motors are easy to control with drivers, and this feature
establish its important position in the field of precise control.
1. Precise control achievable, programmable
2. Without electromagnetic interference & electrical sparks
3. Small size
4. Reasonable price
5. Low noise
6. Long service life
