Electric Linear Stepping Motor 8mm Micro Stepper Motor With Lead Screw

8mm micro slider screw stepper motor 3.3V DC pm stepper motor of Camera Lens linear stepper motor:

VSM0807 is a precision micro stepping motor, the pitch between the output shaft and the screw is 0.4mm, and the thrust is generated by the screw and the screw that supports the screw.
The basic step angle of the motor is 18 degrees, the motor runs 20 steps per week, and the displacement resolution can reach 0.02mm, achieving the purpose of precise control.
In terms of actuators, the subdivision drive method is used to satisfy.
Due to its small size, high precision, and easy control, this micro stepping motor is widely used in cameras, optical instruments, lenses, precision medical equipment, automatic door locks and other fields.
The input part of the motor is FPC, but it can be changed to the form of connection pin, PCB, etc. according to customer needs.
Mounting brackets can be replaced according to customer requirements.
Our team has more than 10 years of experience in stepper motor design, development and production, and can realize product development and auxiliary design according to the special needs of customers!
Customer needs are our efforts, please feel free to contact us!

Main Application

1) vending machine

2) Optical instruments

3) Precision medical devices

4) beauty equipment

Other precise control application

8mm M2 lead screw slider stepper motor Specifications:

Drawing of 8mm plastic slider stepper motor with 10mm stroke:

TYPE of WIRE CONNECT:

Motor input method with Pin type

, FPC, PCB, Lead wire etc. These can be customized according to customer needs.

Product display for 8 mm plastic slider stepper motor:

8mm mini linear motor 3.3VDC micro slider screw stepper motor of Camera Lens

Customers can customize content:

1. In terms of the outer diameter of the product, it can be selected according to the customer's use environment, space strength, etc. The size for customers to choose is 6 8 10 15 20 25mm and other different sizes.

2. The outlet position of the motor can be freely selected within a range of 360 degrees to meet the installation requirements in the best state. The connector of this motor is FPC, and the connector can also choose lead, PCB, and bare pins.

2. According to customer requirements, the effective stroke of the motor can be customized within a certain range, mainly considering the diameter and length of the lead screw.

Usually the maximum length of the M2 screw we choose can be 50mm, the M3 screw can be 100mm, and the M4 screw can also be 100mm. We can also do 150mm. Small motors use a lead screw with an excessively large diameter, which consumes a lot of power, so comprehensive consideration should be taken when selecting a motor.

4. The material of the slider is generally plastic, which is easy to form and economical.

When customers have special use environment and requirements, the slider can also use metal parts.

At the same time, the cost will be relatively high, which is determined according to the customer's requirements for the shape and size of the slider.