|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
VSM0825 is a precision micro 8mm diameter stepper motor with a
screw pitch of 0.4mm on the output shaft, which is supported by the
screw and rotates into thrust.
The basic step angle of the motor is 18 degrees, and the motor runs
20 steps per week, so the displacement resolution can reach 0.02mm,
achieving precise control.
The actuator adopts a subdivision driving method to meet the
requirements.
The output part of the motor includes connecting wires, FPC, and
bare needles, which can be customized according to customer
installation requirements
Because of its small size, high precision, easy to control and
other excellent characteristics, so this micro stepper motor is
widely used in the camera, optical instruments, lenses, precision
medical devices, automatic door locks and other fields.
The motor input part of the FPC, but can according to the customer
demand can be changed to a connecting line needle, PCB and other
forms.
The mounting bracket can be changed according to the customer's
request.
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
| Product Name | 8mm micro stepper motor | |||
| Model | VSM0825 | |||
| Rated Voltage | 3.3V | |||
| Current Per Phase | 150 mA /phase | |||
| Coil Resistance | 20 Ω±7% | |||
| No. Of phase | 2 Phases | |||
| Step Angle | 18 degree | |||
| Excitation Method | 2 Phase Excitation | |||
| Drive Mode | Bipolar Drive | |||
| Pull-In Torque | 1.5 gf.cm At 500 pps | |||
| Pull-Out Torque | 2.0 gf.cm At 500 pps | |||
| Max. Response Frequency | 800 pps, | |||
| Max. Starting Frequency | 2000 pps, | |||
| Insulation Class | Class E for Coils | |||
| Insulation Strength | 100 V AC for One Second | |||
| Insulation Resistance | 1.0 MΩ (DC 100 V) | |||
| Operating Temperature Range | -10~+60 ℃ | |||
| Weight | 5.5 g(Ref.) | |||
| OEM & ODM SERVICE | AVAILABLE | |||
Competitive Advantage
Motor input method with Pin type, FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Customization service:
Motor’s design can be adjusted based on customer’s requirement including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor
Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.
PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.
